Recent content by evgeniy

fenix-store
  1. E

    The Official Zebralight Thread .

    It's tint question :) Fc is ~~~ 3500-4000K, but tint may be sligthly different.
  2. E

    MiBoxer C2-4000 Charger Simple Review

    I bought MiBoxer C2-4000 2 weeks ago, in Gearbest. I see on my C2-4000 very low termination currents, <0.01A, when charge 18650 Li-Ion, and final part of charging, with currents of 0.05-0.01A, require additional 30-60mins, but this part adds <0.5% of capacity. On reviews and tests I...
  3. E

    Zebralight H600/H604/H600F MKIV headlamp

    Thanks.
  4. E

    Zebralight H600/H604/H600F MKIV headlamp

    I also ordered few headlamps and flashlights (latest - last week) from ZebraLight.com , all with "airmail China Post with tracking - free shipping", all parcels was perfectly tracked, typical time from China to Europe (Ukraine) - 3-4 weeks.
  5. E

    Zebralight H600Fc Mk IV - First Impressions

    This level of thermal regulation isn't new : as described in ""measurements of turbo mode in SC600w mkIV, H600FD mk IV, H600w mk III" , H600w mk III has even more oscillations, than mk IV, but ... for 1.5-2 years of practical use H600 mark III series nobody wrote about for "wrong thermal...
  6. E

    The Official Zebralight Thread .

    may be, PID in mk. IV version isn't optimal (tuned for max.output), but what we have in practice for H600Fc/Fd headlamps ? 1) max. mode for continuous use in any weather is 280lm (may be, except very hot nights), this mode has no PID. And no problems with PID, no problems with springs. 2) In...
  7. E

    Zebralight H600Fc Mk IV - First Impressions

    may be, PID in mk. IV version isn't optimal (tuned for max.output), but what we have in practice for H600Fc/Fd headlamps ? 1) max. mode for continuous use in any weather is 280lm (may be, except very hot nights), this mode has no PID. And no problems with PID, no problems with springs. 2) In...
  8. E

    The Official Zebralight Thread .

    Because without PID flashlight may be damaged, (no matter in what group you enabled Hi modes). Yes. And it's one of reasons , why we choose Zebra's.
  9. E

    Zebralight H600Fc Mk IV - First Impressions

    ... And problem completely solved.
  10. E

    The Official Zebralight Thread .

    spring isn’t a problem in all modes, except H1. And we can use any 18650 battery in these headlamps, it’s important point. thanks, Zebralight. (2 caps, 1st universal, with long spring, and 2nd special cap with pins for 65mm unprotected, will be better, but 2 caps costs more money).
  11. E

    Defective zebralight H600FD MK IV

    ZL635 --- 18650 Protected Li-ion Battery. For very hi drain modes such as H1 / 1560lm strongly recommended UnProtected batteries. All new Zebra flashlights with same brightless in H1 (sc600** mk III, sc600** mk IV, SC64**) use new springs/tailcaps and can work only with unprotected...
  12. E

    Zebralight H600Fc Mk IV - First Impressions

    thanks. With new firmware we can simply change H1 from 1560lm to 980lm and resolve this issue.
  13. E

    Defective zebralight H600FD MK IV

    thanks. With new firmware we can simply change H1 from 1560lm to 980lm and resolve this issue.
  14. E

    Zebralight H600Fc Mk IV - First Impressions

    "The light runs impressively well at 980 lm" Are you see any low-freq. flicker / thermocontrol problems in 980lm and 590 lm modes, similar to problem, that founded by NPL in 1568lm mode ?
  15. E

    Defective zebralight H600FD MK IV

    These flicker (few times per sec. ?) is found only in H1 1568 Lm mode ? or you found same problems in H2 980 Lm /562 Lm /296 Lm () modes ?
See more

Latest posts

Top