Recent content by Fichtenelch

fenix-store
  1. F

    Jetbeam's Service is ridiculous!

    actually not, since the clearance is so little and the ring operation to one side is easy. when i just loosened the threads a little bit, it was super smooth. when it was still working. problem is, when you loosen it too much, wires get ripped off and thats it. So, pls consider that the light...
  2. F

    Jetbeam's Service is ridiculous!

    Hello, i have some trouble with my TCR 10. I purchased it..maybe last year. When it arrived, everything was ok. Carried it around a bit, put it to use. After around 3-4 Days i noticed that i could not turn the ring anymore. That was the moment i thought, how hard could it be. As i am not...
  3. F

    Jetbeam TCR10 repair

    Actually i had the same issue with my tcr10, i read your problem before i disassembled mine. couldn't turn the selector ring anymore, had it for only 2 days. ended up ripping the wires while trying to disassemble. but i contacted jetbeam, shipped it to them mid of january and today i got it in...
  4. F

    R.I.P: Beloved Nitecore D10 GDP

    I would contact Nitecore, maybe you get a replacement..or even an upgrade ;) I would consider the EC1
  5. F

    Need your help for best option

    Looks like around 17mm. Just have a look on fasttech.com and get a nice xp-g or xm-l u2 and a driver with the current you like (search for v10) and pop it in ;-)
  6. F

    Do I Want To Go Li-Ion???

    If you go for li-ion, go for 18650. Imho the 14500 lacks capacity. I don't like to put 3 or 4 batteries into a light, especially not in darkness. And you don't get too much light out of a 1AA or 2AA Light. But it also depends on your needs. In a low-light environment, you don't need 1000 lumens...
  7. F

    Looking for a driver, 4S LiIon + 7 XP-G in Series

    Hi, i have a 40mm board with 7 xp-gs wired in series. it can be powered up to 1500mA and a dimming function would be great (3 modes pwm e.g.). i would like to power it with 3-4 18650's. (3S: 10.8V-12.6V or 4S: 14.4V-16.8V) 4 18650s would be fine. Vf is at around 18V. Space for the driver is not...
  8. F

    Possible Removal of Medium> Low> Strobe> SOS Modes, Only High From XM-L T6 Chip?

    Re: Possible Removal of Medium> Low> Strobe> SOS Modes, Only High From XM-L T6 Chip? You have to get access to the driver, remove the battery and look down the tube, there you can see a round pcb. you have to change the driver. there are a lot of different drivers available and on some...
  9. F

    Android phone Battery 100% charge = 4388mV

    Exactly, without knowing the Chemistry of the Cell, the voltage doesn't say that much. 4,35 can be perfectly fine or massively overcharged....
  10. F

    ultrafire c 8 really 1000 lumens?

    I also like these c8 xm-l's very much, they have a good output for low money. it's not a high-quality flashlight like any surefire, but it is very bright and i doesn't matter if you drop it. i would go for a 3 amp pwm driver instead of the 7135 drivers.
  11. F

    Mounting a TK70. Where do you keep yours?

    You could just build one out of kydex and attach it to where you want it to...
  12. F

    Any Reviews about the Skyray 2x18650 XM-L

    Hi, just wanted to ask if anyone knows something about the quality of this.light. Looks pretty unique and has a huge reflector, so it might throw very well...haven't found any reviews about it yet. Available as skyray or uniquefire with 1x18650 or 2x18650 xm-l t6. Click for 1x18650
  13. F

    Who likes the new FourSevens?

    Hmm they still don't offer a Quark Turbo 18650... :( I'm not going to get one until then.
  14. F

    Disappointed :(

    Do you have any more batteries to test? Is the AW 18650 fully charged? Which brand cr123s?
  15. F

    "Thanks for the keyring light; I'll keep it near my closet"

    They only wear it, if it is small AND pink. or red.
See more

Latest posts

Top