Recent content by jason 77

fenix-store
  1. J

    Anyone used these LED's in a project before?

    Voltage increases in a series circuit not current, so two 12Volt 5Watt LEDs in series will still be 5Watts but will need 24Volts to power on fully. The Driver you have linked to looks like it is putting out 900-1000mA "website is kinda vague?". either way I would say you are overdriving those...
  2. J

    The right Power supply

    What are the specs for the RBG LEDs you are planning on using?
  3. J

    coast g30 switch replacement?

    Does anyone know if you can order just the switch for the flashlight below? The metal parts inside it are corroded beyond repair.....
  4. J

    Reef aquarium light

    I built a 3 up led flashlight using a 18650 flash light host from fasttech, the 3 up led star I got from ledsupply. The wave length I ordered was listed as 400-410nm and it makes things glow like crazy. Total price minus the battery was under $50.
  5. J

    Reef aquarium light

    I built a 3 up led flashlight using a 18650 flash light host from fasttech, the 3 up led star I got from ledsupply. The wave length I ordered was listed as 400-410nm and it makes things glow like crazy. Total price minus the battery was under $50.
  6. J

    17mm driver for RGB Triple

    http://intl-outdoor.com/ sells a 17mm driver but its for a RGBW set up.
  7. J

    94 CRI (minimum) in a standard 5mm DIP LED form!!

    I have a bunch of these in the 3200K and 5600K, in both 30 and 60 degree types. Both have very "pleasing to the eye" outputs.
  8. J

    Help with replacing MR16/GU5.3 Halogen Bulbs

    What are the current halogen bulbs rated at? are they 240v or 12v ?
  9. J

    LED Replacement for 14,000 Lumen G12

    Go to newark.com search for bridgelux, they have quite a few at 10,000 lumens and a wide range of kelvin temp colors as well. I doubt very much if that LED you linked to from amazon actually puts out the claimed 12-14,000 lumens.
  10. J

    LED Replacement for PLC 110/130v 13W

    If your talking direct plug in replacement, I highly doubt there is one. I would suggest to just replace the entire light unit with a newer LED equivalent if you really want an LED light.
  11. J

    LED pilot light for 220 extension cord

    Could the OP take more pictures of the led and surrounding wiring please?
  12. J

    GE BrightStik led

    I don't know about the philips bulbs, but when I went back to the HD it bought mine from just a week later all the GE brighstik bulbs were gone..
  13. J

    GE BrightStik led

    Just bought a 3 pack today, and tore one open to see inside. The box The "bulb" Got the plastic top off, looks like it was snapped/glued in, and the LEDs are what I thought chip on board smds. I thought the way they connected the LED board to the driver was rather clever. I had to...
  14. J

    GE BrightStik led

    The HD by me says they are getting their shipment of these bulbs on 6/28. So I guess I have to wait until July to check them out.....
  15. J

    Steam punk inspired light for my Brother and his Wife.

    Just got done putting it all together, Uses a CREE XHP50 being driven at about 1.5 amps with a simple constant current circuit and 555 timer PWM to allow dimming. The circuit and power supply are in the wooden base and the little faucet knob is attached to the pot in the 555 circuit. And...
See more

Latest posts

Top