I had to remove a couple of mm off the top of the battery carrier
with a dremel and some 200 grit for my unprotected NCR18650a
to make contact. It was pretty easy except the carrier is steel not
aluminum
and I have a crummy cordless dremel
In a perfect world Id like an aluminum carrier to save weight-
maybe Ill mod mine and whittle it down a bit :shrug: since Id like
to use this as a bar light host on my MTN bike.
also, not sure if the inner ring is holding my Van Isle quad in or
not- I jammed it in with copper foil tho so I doubt its going anywhere.
so for anyone having problems with unprotected or short cells not making
contact - just sand down the top of the carrier a little. You could even
grind it on the sidewalk if you had to:sick2: (some of us dont have tools)
lovecpf