Sold/Expired 3rd Run: MC-E + 18650

[download]

Bushman5,
I did not accept any MO yet, let me check it, please wait.

sprinkle,
No extra cost of switch, $30 for reservation is fine.
Wow, nice found of the pocket Clip!
Tail cap Diameter is 23mm, same as Nitecore D20, not D10 19mm.
I guess the inside lip of tail cap is not depth enough to place the mounting part. You may need to file the inside mounting part and drill 2 hole for mounting use. But I think it may affect the tail standing function.
hope it helps.

 

[sprinkle]

Thank you very much for answering my questions! I may be able to get the clip to work for it if not a friend of mine is a machinist and can probably make me something.

Oh and

OP reflector, black tailcap, extra switch.

Thanks!

 

[download]

Thanks sprinkle,
If you can access the machine, nothing is impossible.

 

[motorhed66]

Is it wise to go ahead and get an additional switch? if you recomend it Ill take an additional switch also...

 

[download]

Actually, I will ship all with extra switch, back & green tail cap.

 

[sprinkle]

Actually, I will ship all with extra switch, back & green tail cap.

Wow! Thanks a lot!

 

[Sober]

OP reflector, Green tailcap

Regards

 

[Sprocketman]

From the first thread:

I just found some issue with driver.
When using the mid level (25%), sometime it has slightly "flick" at the beginning.
After a few minus running, the "flick" will disperse.
The High (100%) & Low (5%) work without any problem.

Have you resolved the question about the flicker for this run? Hope so!

Randy

 

[gessner17]

I'll take one, OP, i don't care what color switch.

 

[download]

Sprocketman, 2nd run already used new branch of driver, did not report of any flicker yet.

gessner17, waiting for your reservation. Thanks!

Expected finish everything within a month now.

 

[gessner17]

Paypal sent!

 

[nitewind]

Hi Download,
for reservation of one light

Thanks
nitewind

 

[nitewind]

Hi Download,
Forgot to say, I'd like an OP reflector.
Thanks
nitewind

 

[download]

Thanks gessner17 & nitewind, first post was updated.

 

[Jakkle5]

.

 

[KSC001]

Hi Download,

I'll take one; OP reflector with green tailcap cover. Thanks.

 

[KSC001]

Paypal sent for reservation of one light. Thanks.

 

[download]

Thanks KSC001.

The 3nd run list is full, please do not pay for reservation.
:thanks:

 

[RGB_LED]

Sprocketman, 2nd run already used new branch of driver, did not report of any flicker yet.

I have an MC-E from the second run and I'm happy to report that there is no flickering at all in any of the modes. :thumbsup: The output is incredible for a light that is just a bit bigger than my Fenix P3D!

Btw, just a general comment about batteries: I use an AW 18650 as well as unprotected 18650's and they all fit and work well. Runtime on High with the AW 18650 was 47 minutes before it begins to flash intermittently - I'm assuming that it's warning that the voltage is dropping below what the driver is requiring. During the run, I don't see any significant drop in output - at least, to my eyes - but I don't have any real measuring equipment to confirm... I may try to use my photo light meter to measure EV just to see if there is a noticable drop.
This is now one of my favourite lights and I now use it as my back-up edc in my coat pocket.

 

[download]

Thanks RGB_LED,

The drive have low voltage warming, it will flash once every 30sec.
That will not affect the the real world usage and let you know it has to recharge. :naughty: