danjoo
Newly Enlightened
HI CPF.
I want to show my Hid builds to get it rated buy you Flashlight Pros. :thinking:
Iam not an electrican, just Light Hobbyist, maybe some electricans get some nightmare because of my use of the LIIon. :sigh:
When iam infected with hid this is my first kit i bought.
It is a motorcycle Hid Upgrade Kit rated at 35 Watt.
Accidently i buy a 12000k kit, till the bulb die i will use it.
I mod it to calculated 66 bulb watt, like posted here , posting #58.
It runs from 4P2S 18650 Laptop harvested LiIon Cells.
14,8V 5,2AH.
The amps needed are normal to much for the cells but i really like to put those light in this small case.
The Light has a charge connector for a LiIon Wallcharger 14,8, without balancer.
Runtime on low can be close to one hour i guess.
The rubber wich hold the lens is in trouble after a few minutes because of the Heat.
It is activ cooled by a seperate switschable and dimmable 40mm fan.
But for the rubber is still to much, maybe the Light is to small for such a power.
The Diameter of the Reflector is 100mm.
Light is original with a H3 bulb, I buy something differrent an have to glue the bulb in place, very bad, next time t try to glue the wrong bulb to a fitting bulb socket.
Here are some Pics:
I Paint the Bezel in GITD paint because without the Light is dazzling me in the use. The grip is adjustable. The Fans switch and Pot is on the rear.
Fan is Connected to the 14,8 volt by a 5watt 10k Resistor inline with the Poti. Otherwise the Pot melt down and Kill the Fan.
Here is the carge connector visible and the 470k lin Pot and the Light Main switsch(red).
To run the Light it has a main switsch to start the system, blue High Power Led inside, then the Fan and the light is ready to be startet by separat switches.
The Bezel with green Glow in the Dark, and the bulb is also glued in with blue GITD powder. Bulb is Just Cooling down...
Bulb is an Ceap China one wich comes with the Ballast Kit.
If Possible i like to buy a fatboy but what i read its very hard to get.
Compared with my other 4300K HID.
The small ones Lens is broken in the first tests because of the heat.
Right now and for the picture it is a oven lens wich i buy from a local glazier, it is light amber tint. I dont light that cost some output, but i know no other source for this size of lens.
Anybody know a source for good Lenses in this Size?
And finaly some Beamshoots Distance is Measured by Google Maps.
Additional Infos on the Gif.
At the google pic is only one of the existing 3 windmills.
And finaly beamshoot gif together with my Other Hid Light.
Please let me know what you think guys.
Thanx
Daniel
I want to show my Hid builds to get it rated buy you Flashlight Pros. :thinking:
Iam not an electrican, just Light Hobbyist, maybe some electricans get some nightmare because of my use of the LIIon. :sigh:
When iam infected with hid this is my first kit i bought.
It is a motorcycle Hid Upgrade Kit rated at 35 Watt.
Accidently i buy a 12000k kit, till the bulb die i will use it.
I mod it to calculated 66 bulb watt, like posted here , posting #58.
It runs from 4P2S 18650 Laptop harvested LiIon Cells.
14,8V 5,2AH.
The amps needed are normal to much for the cells but i really like to put those light in this small case.
The Light has a charge connector for a LiIon Wallcharger 14,8, without balancer.
Runtime on low can be close to one hour i guess.
The rubber wich hold the lens is in trouble after a few minutes because of the Heat.
It is activ cooled by a seperate switschable and dimmable 40mm fan.
But for the rubber is still to much, maybe the Light is to small for such a power.
The Diameter of the Reflector is 100mm.
Light is original with a H3 bulb, I buy something differrent an have to glue the bulb in place, very bad, next time t try to glue the wrong bulb to a fitting bulb socket.
Here are some Pics:
I Paint the Bezel in GITD paint because without the Light is dazzling me in the use. The grip is adjustable. The Fans switch and Pot is on the rear.
Fan is Connected to the 14,8 volt by a 5watt 10k Resistor inline with the Poti. Otherwise the Pot melt down and Kill the Fan.
Here is the carge connector visible and the 470k lin Pot and the Light Main switsch(red).
To run the Light it has a main switsch to start the system, blue High Power Led inside, then the Fan and the light is ready to be startet by separat switches.
The Bezel with green Glow in the Dark, and the bulb is also glued in with blue GITD powder. Bulb is Just Cooling down...
Bulb is an Ceap China one wich comes with the Ballast Kit.
If Possible i like to buy a fatboy but what i read its very hard to get.
Compared with my other 4300K HID.
The small ones Lens is broken in the first tests because of the heat.
Right now and for the picture it is a oven lens wich i buy from a local glazier, it is light amber tint. I dont light that cost some output, but i know no other source for this size of lens.
Anybody know a source for good Lenses in this Size?
And finaly some Beamshoots Distance is Measured by Google Maps.
Additional Infos on the Gif.
At the google pic is only one of the existing 3 windmills.
And finaly beamshoot gif together with my Other Hid Light.
Please let me know what you think guys.
Thanx
Daniel