I am an artist and have just build a new studio in my home. I am looking for a wider angle, 5000K, 90+CRI, LED flood bulb for two fixture types: WAC trac lighting for a design wall and TechLigiting SoCo pendants/sockets over a large cutting table. For the WAC fixtures, PAR20 AND PAR30 bulbs are recommended. For the pendants, I would like to stick with the same bulb so the light is consistent. The only bulbs I have found that fit these specifications are from Yuji International, but they will not have the PAR bulbs available for at least a month in the US. In addition, their Par30 only provides 450 lumens, which seems low. Am I searching for the unicorn of LED bulbs? If I have to choose between light temperature and high CRI, which way should I lean? In an art production studio, where color is very important, is it better to have a 3000K light with a CRI of 87 or a 5000K light with a CRI of 80? Thanks in advance for any advice you all might have.