LEDAdd1ct
Flashlight Enthusiast
*CLOSED*
I am looking for two hosts.
Host One
I am looking for a host such as a 4D Maglite or other 3x32650 configuration with low resistance switch,
low resistance G4 bi-pin socket, and MOP aluminum reflector.
After exploring many different custom solutions over several years, I keep coming back to the fact
that G4 bi-pin bulbs are cheap and plentiful and allow for many configurations.
I've wanted to build a three cell 32650 LiFePO4 incan for a long time and just need the host.
Gonna pop a JC5607 in there for fun lumens!
Please post here or email me with what you have.
Host Two
I am looking for a "C" size Maglite, also with low resistance bi-pin socket and low resistance switch,
which can fit two protected 26650 cells in series. This will likely be a cut-down 3C Maglite with no "C"
in the serial number. It should also have a MOP aluminum reflector and G4 bi-pin socket.
I would request that if you have one to offer and post in this thread or email me,
you do so knowing it can fit protected 26650 cells and/or can easily fit unprotected 26650
cells with room to spare.
With the recent advancement in protected 26650 cells, this one will be getting a couple of these
and a Philips 7388 bulb. Something with HA would be nice but is not required.
I know there are many of these out there from the "good old days."
Let's get these off of the shelf!
I am looking for two hosts.
Host One
I am looking for a host such as a 4D Maglite or other 3x32650 configuration with low resistance switch,
low resistance G4 bi-pin socket, and MOP aluminum reflector.
After exploring many different custom solutions over several years, I keep coming back to the fact
that G4 bi-pin bulbs are cheap and plentiful and allow for many configurations.
I've wanted to build a three cell 32650 LiFePO4 incan for a long time and just need the host.
Gonna pop a JC5607 in there for fun lumens!
Please post here or email me with what you have.
Host Two
I am looking for a "C" size Maglite, also with low resistance bi-pin socket and low resistance switch,
which can fit two protected 26650 cells in series. This will likely be a cut-down 3C Maglite with no "C"
in the serial number. It should also have a MOP aluminum reflector and G4 bi-pin socket.
I would request that if you have one to offer and post in this thread or email me,
you do so knowing it can fit protected 26650 cells and/or can easily fit unprotected 26650
cells with room to spare.
With the recent advancement in protected 26650 cells, this one will be getting a couple of these
and a Philips 7388 bulb. Something with HA would be nice but is not required.
I know there are many of these out there from the "good old days."
Let's get these off of the shelf!
Last edited: