EDC Help please

[BBeard]

Looking for the following in a EDC light
1 CR123
Deep carry clip lens down (negotiable lens down)
200 lumen min
Taillight clicky with momentary contact
Not longer than three inches. (not negotiable)
Prefer price to be not more than $50.00
Prefer Hard Anodize or polished.
I really dont care about SOS, strobe, multiple settings. (the simpler the better. If it has multiple setting i prefer it comes on in high)

 

[ven]

Hi there,i have the t10 lights which are the AA version and a great light,this is the cr123/16340 version,simple 3 mode UI
http://www.candlepowerforums.com/vb...RCR-Titanium)-Review-RUNTIMES-BEAMSHOTS-VIDEO

 

[BBeard]

Nice light Ven Thanks for your help. I just went back and edited to add momentary contact on the tailcap clicky.

Hi there,i have the t10 lights which are the AA version and a great light,this is the cr123/16340 version,simple 3 mode UI
http://www.candlepowerforums.com/vb...RCR-Titanium)-Review-RUNTIMES-BEAMSHOTS-VIDEO

 

[cland72]

Check out the Klarus P1C

 

[ven]

Check out the Klarus P1C

I *HAD*the p1a klarus and simple 2 mode with momentary as mr cland suggested. I have to admit it was a very used light in work,my edc on most days until i lost it
Only weakness was the clip that broke.............almost straight away! unfortunately Klarus found it impossible to send me one:shrug:

I did fit a nitecore with the help of glue and did not budge once during heavy use,so not all LOST :laughing: pun intended

 

[yoyoman]

Yes, the Thrunite T20 is the CR123 version of the T10. The cool white version is 255 lumens. The clip isn't the greatest, but you can get a replacement part.

@Ven, I looked at this post and didn't think of the T20. I'm with you - I love my T10s.

 

[BBeard]

Thanks but it's 3.5. Three is my absolute limit.

Check out the Klarus P1C

 

[cland72]

EagleTac D25C Clicky