Franken MagDaddy PAR46 HIR : > 400,000 lux@ 1 meter vs. 35W HID lighthouse beam shots

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Franken MagDaddy PAR46 HIR Throw Machine: Over 200,000 lux@ 1meter

Nice lamp, what's the CP rating?
 

Ra

Flashlight Enthusiast
Joined
Jul 15, 2004
Messages
1,003
Location
The Netherlands
Re: Franken MagDaddy PAR46 HIR Throw Machine: Over 200,000 lux@ 1meter

Facing forward may not work, the filament is near the top of the reflector, which I would assume to be the focal point where the led need to be. If facing forward with LED projecting 120 degrees or so forward, most of the light won't even hit the PAR46 reflector.

Sorry, I meant facing forward 'from' the probe, so facing towards the reflective surface of the PAR46..So the end of the probe sticks out of the front window,
with the led mounted at the inner end of the probe, at the position of the filament..


Regards,

Ra.
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Franken MagDaddy PAR46 HIR Throw Machine: Over 200,000 lux@ 1meter

Sorry, I meant facing forward 'from' the probe, so facing towards the reflective surface of the PAR46..So the end of the probe sticks out of the front window,
with the led mounted at the inner end of the probe, at the position of the filament..


Regards,

Ra.


Got it, that should defenately work.
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Franken MagDaddy PAR46 HIR Throw Machine: Over 200,000 lux@ 1meter


The bulb in your link is" 39395 – PAR64

I found the GE spec sheet for this bulb:
http://genet.gelighting.com/LightProducts/Dispatcher?BreadCrumbValues=Specialty^Airport%20_,%20Airfield&PRODUCTCODE=39395&REQUEST=COMMERCIALSPECPAGE&SearchFieldCode=null

Although it has a very narrow spot out of the bigger PAR64 lamp, the lamp is rated at 180,000CP,
where my HIR PAR46 is rated at 275,000CP. Therefore, this bulb is not going to out throw MagDaddy.

PHOTOMETRIC CHARACTERISTICS
Horizontal 3.5° - 50 % Beam Spread -
Vertical 3.5° - 50 %
Center Beam Candlepower (CBCP) 180000
Max. Beam Candlepower (MBCP) (MAX) 180000
.
.
 
Last edited:

RAGE CAGE

Enlightened
Joined
Aug 21, 2008
Messages
968
Location
OH
Re: Franken MagDaddy PAR46 HIR Throw Machine: Over 200,000 lux@ 1meter

stunning work ma......you are the Picasso of JB Weld work.:thumbsup:
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Franken MagDaddy PAR46 HIR Throw Machine: Over 200,000 lux@ 1meter

stunning work ma......you are the Picasso of JB Weld work.:thumbsup:


Hahaha:crackup: that's a good one, thanks man, you are too kind.

I am no Picasso but maybe JB Weld should pay me for the free
advertising I've done :devil:
 

jkilo

Newly Enlightened
Joined
Oct 28, 2009
Messages
92
Location
Central FL
Re: Franken MagDaddy PAR46 HIR Throw Machine: Over 200,000 lux@ 1meter

plasmalamp285.jpg




Ma Sha, What is this thing? Plasma sulphur? Any pics of the business-end?
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Franken MagDaddy PAR46 HIR Throw Machine: Over 275,000 lux@ 1meter

A little update on the MagDaddy & I managed to get it to 300K lux :devil:

The bulb should be able to handle a bit more volts than 13V, so instead of 4x3v battery I used initially, I want to push it a little more.

I wired in a NTC resister for soft start, & I put in 4x26650 IMR instead.

Wow, big big improvements, At 16V with NTC, no poof.

The lux went up to ~300,000 lux @ 1 meter.
 

pepko

Newly Enlightened
Joined
Jan 11, 2008
Messages
143
Location
Slovakia
Re: Franken MagDaddy PAR46 HIR Throw Machine: Now ~300,000 lux@ 1meter

beamshots ?
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Franken MagDaddy PAR46 HIR : >400,000 lux@ 1meter

Here are some beam shots:
All shots are 2" exposure, F3.3 ISO200.


5xR2 Cree LED Flashlight, 1200 Lumens.
Distance to the Wall is 55ft.
dscf7775g.jpg


MagDaddy PAR46:
Distance to the Wall is 55ft.
dscf7827.jpg


MagDaddy: 75Ft to the ground
dscf7828.jpg


MagDaddy: Distance to the tree: 100ft
dscf7829.jpg
 
Last edited:

^Gurthang

Flashlight Enthusiast
Joined
Jul 2, 2009
Messages
1,071
Location
Maine, deep in the Darkness of the North
Re: Franken MagDaddy PAR46 HIR Throw Machine:Now ~300,000 lux@ 1meter + out-door shot

Sha,

Thanks for the beamshots.

I think you need to get more distance though, the FMD shots are overexposed. A 100, 200 & 400 yd comparison shots series would be interesting.....

BTW, did any moths go up in flames during that photo shoot???
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Franken MagDaddy PAR46 HIR Throw Machine:Now ~300,000 lux@ 1meter + out-door shot

I am planning for it, I am getting an HID, want to see if the Magdaddy can beat 35W HID.

My spot:
buglightbeamshotupto03m.jpg
 

^Gurthang

Flashlight Enthusiast
Joined
Jul 2, 2009
Messages
1,071
Location
Maine, deep in the Darkness of the North
Re: Franken MagDaddy PAR46 HIR Throw Machine:Now ~300,000 lux@ 1meter + out-door shot

Sha,

Can't wait for beamshots.

Be careful though, you don't want to outshine Bug Light and confuse any tankers coming into S. Portland harbor!!!

[Headline in Portland Press Herald: Tanker runs aground due to man w/ flashlight!]
 

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Franken MagDaddy PAR46 HIR Throw Machine:Now ~300,000 lux@ 1meter + out-door shot

Good point, don't want to be picked-up by Police for messing up boat traffic either :devil:

This is the HID I got coming in: MOZO Li-ion Ultra Light HID that appears to be the clone of L35.
http://www.mozohid.com/eshowProDetail.asp?ProID=1611
2008728152343.jpg


There was a post for another clone here:
http://webcache.googleusercontent.com/search?q=cache:D4Q2RgVq-M4J:www.candlepowerforums.com/vb/showthread.php%3Ft%3D193703%26page%3D9+l35+factory+same&cd=2&hl=en&ct=clnk&gl=us

You can see the other Clone looks almost the same as Mozo & the clones are made by the same factory that makes the
Titanium Innovations L35:
HID.jpg
 
Last edited:

Kestrel

Flashaholic
Joined
Oct 31, 2007
Messages
7,372
Location
Willamette Valley, OR
Re: Franken MagDaddy PAR46 HIR Throw Machine:Now ~300,000 lux@ 1meter + out-door shot


You know, folks reminisce about the good old days of CPF, but now that some of the more talented hobbyists are having to use satellite views more and more often to illustrate the performance of some of these handheld projects, wow. Amazing work! :thumbsup:
 
Last edited:

ma_sha1

Flashlight Enthusiast
Joined
Jan 10, 2009
Messages
3,042
Location
CT, USA
Re: Franken MagDaddy PAR46 HIR Throw Machine:Now ~300,000 lux@ 1meter + out-door shot

Thanks, I can't wait for the HID to show-up,

I am rooting for the MagDaddy
 

^Gurthang

Flashlight Enthusiast
Joined
Jul 2, 2009
Messages
1,071
Location
Maine, deep in the Darkness of the North
Re: Franken MagDaddy PAR46 HIR Throw Machine:Now ~300,000 lux@ 1meter + out-door shot

Sha,

+1 on the MagDaddy lickin' the Mozo.....

Too bad M@GLite doesn't put on "gatherings" like Range Rover has for its vehicles. If you'd show up w/ the MDaddy they'd either toss you out or elect you emperor!!! And the Daddy would make a suitable scepter.....
 
Top