FS: Fenix MillerMod LOP 3-Stage ANSWERS
Lightscene
To answer your questions: 1: it has a Luxeon 1 W R-Bin LED. 2: On high it nominally draws 450 ma.
I don't know about exact lume differences between the stock Fenix L0P and the Fenix LOP MillerMod (MM), but the MM is much brighter on its highest setting than the stock L0P of the July 2006 era. One thread on the Candlepower forum indicates it is about twice the brightness. That seems right to me using my Mk II eyeballs to measure the light output. My SWAG would be between 50 and 50 lumens on birghtest setting.
The MM-L0P also introduced a very slick progressive three-way switch. As you twist it on it gets progressively brighter in three steps from dimmest to brightest. None of the back and forth with less than 1.5 sec delay you need with the L0P-CE. It is a much easier way to adjust brightness than the current Fenix method, and it does not have the useless and annoying morse code and strobe settings.
In my opinion this is a better light ergonomically because it is more logical, e.g., "tighter=brighter", it can be operated one-handed, it comes on at the dimmest setting, also battery life should be longer than the new CE versions, and it is plenty bright for a tiny AAA light.
I don't know if all this justifies the $20 I'm asking over a new Fenix L0P, but after seeing my wife fumble with the back and forth switching of my new Fenix P1D-CE - and finally give up in frustration- I would say the MM-L0P would be the better choice for anyone who might be frustrated or annoyed by the overly complicated new Fenix switch logic, or someone that wants single-handed operation.
In case you've forgotten I'm asking
$65 shipped USPS Priority in CONUS. Slightly more for overseas shipment. Paypal preferred.
NB: These lights cost $100+ shipped last summer. They are no longer being sold. This is a pristine example with a Fenix box, and a separate clip.
Here's my email address:
Picture is of the actual light I am selling.