Sold/Expired FS: Teflon wire + small 0.5W resistors *Part 2*

[linterno]

with Unique Transaction ID #7A3519080T809214H sent for:

2 x gauge 20 x 10' $ 3.50
2 x gauge 26 white/black x 10' $ 2.50
International S&H $ 3.00
Credit card PAYPAL $ 1.00
-------------------------
TOTAL $ 10.00

 

[mudman cj]

linterno - I took your package to the post office this morning. Thank you for your order.

 

[linterno]

Thank you. I'll let you know when I receive it.

 

[Sgt. LED]

26 orange 0.037" 0.94mm

I would like a 20 foot piece of this. Is the price only 3 bucks for CC PP?!! lovecpf
EDIT:

 

[mudman cj]

Sgt. LED - PM sent

 

[JimmyM]

I'd like...
2 x 20' 20ga black/red stripe = 4*$1.50 = $6

2 x 20' 26ga orange = 4*$1.00 = $4
2 x 20' 26ga yellow = 4*$1.00 = $4

2 x 20' 28ga purple (violet) = 4*$1.00 = $4
2 x 20' 28ga green = 4*$1.00 = $4

$1.50 Shipping

$23.50 Total.

 

[Meltdown]

these can be in several smaller lengths, doesn't matter to me:

20 feet 26 guage orange $2.00
20 feet 20 guage black/red $3.50
20 feet 28 purple $2.00

+ 1.50 for first class

+ 1.00 for PP fee

total= 10.00

thank you!

 

[old4570]

26 Gauge / Orange + White 20Feet each = $5 + $3 int Post = $8 Total .

PP = Transaction ID: 59J73569R6001623A

 

[ecallahan]

Paypal Sent.

20' of White/Black = $2
20' of Green = $2
10' of Purple = $1

Shipping = $1.5

Total = $6.50

Thank you.

 

[mudman cj]

Sgt. LED & JimmyM - your packages are on their way to you. Thanks very much for your orders.

 

[Nos]

I would like

20ft: 20 gauge black/red stripe 0.062" 1.57mm 3,5$
20ft: 26 white/black stripe 0.034" 0.86mm 2,5$
20ft: 28 green 0.032" 0.82mm 2,5$
+ int shipping 3,0$

11,5$ thanks

 

[big beam]

Hi mudman cj,
I'm building a 3 cell mag with a P7 emitter.What size wire will I need to run this thing?To be honest I think the emitter is a J bin so if the wire is a little undersized it would act like a resister and maybe not overdrive the emitter so much when the batts are hot off the charger.Does that make sense or should I just run the right size wire and make sure the heatsinking is as good as posible.
DON

 

[JimmyM]

Sgt. LED & JimmyM - your packages are on their way to you. Thanks very much for your orders.

I received my order today. Gorgeous stuff. I can't wait to vonvert my first Mag switch with it.
However... Waaayyyyy to well packaged. Dude, save a buck and stick that stuff in a padded envelope. Really.

 

[mudman cj]

JimmyM - yeah, normally I would have, but I didn't have any envelopes big enough to fit your order. I only keep stock of the little ones.

Don - from what I have read a direct drive P7 J bin on 3 Nimh cells should pull <3 amps. This is nominally the case since the cells will deliver about 3.6V and the LED would need about 3.7V to be fully driven. For this I recommend 22 or 20 gauge. To be sure you are not going to overdrive it more than you are comfortable with, you could wire it up and measure the current on fully charged cells, then if the current is higher than you like I could recommend a resistor to add in the tailcap.

 

[big beam]

You only have BK/RED stripe in 20 ga.?No other colors?
Do you have any 22 ga?
DON

 

[mudman cj]

Sorry Don, I only have the one color left in 20 gauge and I'm all out of 22.

 

[big beam]

20' of 20 ga
10' of 26 ga orange
10' of 26 ga white/bk
6.50 right
DON

PP sent

 

[mudman cj]

Meltdown, old4570, ecallahan, Nos, & big beam - I took your packages to the Post Office today. Thank you all for your orders.

 

[old4570]

Meltdown, old4570, ecallahan, Nos, & big beam - I took your packages to the Post Office today. Thank you all for your orders.

:wave: Thank you !

 

[Linger]

**edited re: $5 minimum purchase**
Paypal sent
Payment Sent (Unique Transaction ID #67U500508J0380940)

20f -- 20 guage black/red stripe $1.75x2
10f -- 26 white/black stripe 0.034" 0.86mm $1.25
10f -- 26 orange 0.037" 0.94mm $1.25
$3 international
$1 fees

Thanx,
Linger