Heavy duty wrist strap lanyard for phone

[etc]

Looking for a wrist strap lanyard for my extra heavy phone. I recycled one I got with a light but the phone is huge and heavy (22000 mAh) and want something extra special. The loop part is too thin with almost all lanyard I see on the market. But a paracord would not fit through the hole.

I don't want any plastic parts in it so they do not scratch the phone screen.

 

[Toulouse42]

You can buy cord made of braided kevlar. I found it useful when the hole that the cord goes through is very narrow. It has very good resistance to abrasion. IIRC I got it on Amazon. I got the one with a breaking strain of 200 pounds. If you look up instructions for how to make a lanyard from paracord, the same applies to the kevlar.

 

[scalpel_ninja]

How about this Dyneema thread?

 

[member 786209]

Dyneema's used to make bowstrings, it's tough stuff.

 

[bykfixer]

Might consider a break away feature to ensure if the worst were to happen.... you don't lose a hand.

 

[etc]

You can buy cord made of braided kevlar. I found it useful when the hole that the cord goes through is very narrow. It has very good resistance to abrasion. IIRC I got it on Amazon. I got the one with a breaking strain of 200 pounds. If you look up instructions for how to make a lanyard from paracord, the same applies to the kevlar.

Link?

 

[alpg88]

dive lights have thick heavy lanyards

 

[Monocrom]

That was going to be my suggestion as well.

 

[bykfixer]

 

[Toulouse42]

Link?

I got it on Amazon UK. The link won't be of any use to you but you could go to your Amazon and use the search words "Kevlar Cord".

 

[thermal guy]

Country comm has that I think