Zero_Enigma
Enlightened
Looking for something in the 5-6 degree range as I want super downrange to cut the darkness.
Any recommends?
Any recommends?
Long range tight reflectors for P7/MCE?
- Thread starter Zero_Enigma
- Start date
Help Support Candle Power Flashlight Forum
znomit
Enlightened
Ledil Iris for the MCE.
http://www.cutter.com.au/proddetail.php?prod=cut898
http://www.ledil.com/datasheets/DataSheet_Iris_MCE.pdf
Note these are +/- 6 which isn't really tight. The MCE/P7s are just too big.
You are much much better off going with a quad XPE/G on something like the ledil CXP/LXP or regina reflector.
http://www.cutter.com.au/proddetail.php?prod=cut898
http://www.ledil.com/datasheets/DataSheet_Iris_MCE.pdf
Note these are +/- 6 which isn't really tight. The MCE/P7s are just too big.
You are much much better off going with a quad XPE/G on something like the ledil CXP/LXP or regina reflector.
Last edited:
znomit
Enlightened
It's not that tight, and kinda fragile
https://www.candlepowerforums.com/threads/223798
Can't beat an XPE for throw.
Zero_Enigma
Enlightened
So what are you saying? I wire 6 XPE LED's with tight degree optics with both of them wired in parallel?
longleg
Newly Enlightened
This Fraen in 13,5 degree.
http://www.cutter.com.au/proddetail.php?prod=cut879
It is very good. A buddy has one of these on the helmet, and the wide Fraen on the bars, and the combo is awesome. Both with MC-E.
http://www.cutter.com.au/proddetail.php?prod=cut879
It is very good. A buddy has one of these on the helmet, and the wide Fraen on the bars, and the combo is awesome. Both with MC-E.
Sorry for hijacking this, but I'd like to order some bots from Cutter but don't want to get hammered for the import duty if I can help it. Short of sending it to my relatives in Sydney and having them forward it to me, which will cost me two lost of shipping, is there anything else I can do?
p.s. I'm ordering a Fraen and an RGBX-MX-c to see which I like best.
p.s. I'm ordering a Fraen and an RGBX-MX-c to see which I like best.
BrianMc
Enlightened
- Joined
- Nov 4, 2009
- Messages
- 940
Generic answer of alternate source:
1. CPF Marketplace
and
2. MTBR has at least one reseller some have used.
No experience and no specific names to give, though.
1. CPF Marketplace
and
2. MTBR has at least one reseller some have used.
No experience and no specific names to give, though.
Optical Inferno
Enlightened
I know Future Electronics deals Fraen optics. You may be able to get something through them.
Been looking into that reflector for a bike light...got any beamshots? Will be much appreciated!
longleg
Newly Enlightened
I am 98% sure that the Niterider Pro 1200 uses one of each of these Fraen reflectors. It gets great reviews for its beam pattern:
http://reviews.mtbr.com/blog/niterider-pro-1200/
