The new member of STRIVE series now ready to ship :
The STRIVE-ECO not only support 3xAA (NiMH, Alkaline) but also high capacity 26650 (upto 73mm in length)
The battery tube of STRIVE-ECO :
3xAA holder included.
[FONT="]SideKick UI 3.1 output control[/FONT]
[FONT="]CLICK : power ON/OFF (click means press and release)[/FONT]
[FONT="]HOLD (ON): change level (hold means press for more than 1 second)[/FONT]
[FONT="]- [/FONT][FONT="]While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.[/FONT][FONT="][/FONT]
[FONT="]HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.[/FONT]
[FONT="]Mode A: 100%, 50%, 25%,10%, 1%[/FONT]
[FONT="]Mode B: 14Hz Strobe, SOS, 0.5Hz Light House[/FONT][FONT="][/FONT]
[FONT="]MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
CLICK : power ON/OFF (click means press and release)
HOLD (ON): change level (hold means press for more than 1 second)
[/FONT]
Mode A: 100%, 50%, 25%,10%, 1%
Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
CLICK : power ON/OFF (click means press and release)
HOLD (ON): change level (hold means press for more than 1 second)
Mode A: 100%, 50%, 25%,10%, 1%
Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.
When battery is disconnect from circuit, the SideKick switch will not power up the light.
And the memory will restore to default setting : Ultra (100% output)
Battery level Indication and protection.
The SideKick switch with 2 pilot led to indicates the battery level. It will shows the battery level once every 60 seconds during power ON.
Retail price : USD85.
The order link will be posted by next week
CPFer can get the special offer : USD68.
Order now with your CPFid will receive a FREE diffuser kit.
Before the order link launch, you can also send PayPal to [email protected]
Best regards,
Ricky - Lumapower CS
The STRIVE-ECO not only support 3xAA (NiMH, Alkaline) but also high capacity 26650 (upto 73mm in length)
The battery tube of STRIVE-ECO :
3xAA holder included.
[FONT="]SideKick UI 3.1 output control[/FONT]
[FONT="]CLICK : power ON/OFF (click means press and release)[/FONT]
[FONT="]HOLD (ON): change level (hold means press for more than 1 second)[/FONT]
[FONT="]- [/FONT][FONT="]While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.[/FONT][FONT="][/FONT]
[FONT="]HOLD (OFF) : Hold for 2 seconds to switch from Mode A and Mode B.[/FONT]
[FONT="]Mode A: 100%, 50%, 25%,10%, 1%[/FONT]
[FONT="]Mode B: 14Hz Strobe, SOS, 0.5Hz Light House[/FONT][FONT="][/FONT]
[FONT="]MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
CLICK : power ON/OFF (click means press and release)
HOLD (ON): change level (hold means press for more than 1 second)
[/FONT]
- While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.
Mode A: 100%, 50%, 25%,10%, 1%
Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.SideKick UI 3.1 output control
CLICK : power ON/OFF (click means press and release)
HOLD (ON): change level (hold means press for more than 1 second)
- While holding the SideKick switch for more than 1 second, it will starts to change the output level until you release it.
Mode A: 100%, 50%, 25%,10%, 1%
Mode B: 14Hz Strobe, SOS, 0.5Hz Light House
MEMORY: The STRIVE ECO will memorize the last output and recall it the next power ON.
When battery is disconnect from circuit, the SideKick switch will not power up the light.
And the memory will restore to default setting : Ultra (100% output)
Battery level Indication and protection.
The SideKick switch with 2 pilot led to indicates the battery level. It will shows the battery level once every 60 seconds during power ON.
- GREEN : Full power, 3.6V or above
- GREEN blink : battery voltage lower than 3.6V
- RED blink : battery voltage lower than 3V, and the output will auto switch to 10%
Retail price : USD85.
The order link will be posted by next week
CPFer can get the special offer : USD68.
Order now with your CPFid will receive a FREE diffuser kit.
Before the order link launch, you can also send PayPal to [email protected]
Best regards,
Ricky - Lumapower CS
Last edited: