Britelumens
Enlightened
Hi all,
Sometime back, I have been asked if I could make a board to be use for Lupine Betty headlight / TL when I start selling the CREE XML U2 bin.
And here is the production upgrade board. It runs on 7 x CREE XML U2 bin. Each emitter has an efficiency of 300 Lumens @ 700mA.
The U2 bin emitter can take up to 3000 mA or 3 amples (slight more is possible but good to stick at 3 ampers).
That put the 7 emitter upgrade board to be at about 7000 Lumens on datasheet calculation.
This board can run to a max of 63 Watts ( max recommended ).
It's the last upgrade you ever need on your Lupine Betty
Its only a small run so below are the number of slots available.
Please post "I'll take it" and I will contact you for PAYPAL payment.
Will then update your handler in the sale thread. Thanks!
Added comments:
1) All the ground and tracks are all gold plated for maximum conductivity and aluminum core for superior heat sinking.
2) This board work really well with the 22 Degree or 26 Degree lens if you are wondering.
I will be also posting some photos here about the potential of this board beside it being use on Lupine Betty.
3) There is a minor typo error on the last pic. It should read 2.99 Amperes and 20.9 Volts.
4) In any case if you need privacy for the purchase, its alright to PM me and send me payment.
Price is $100 shipped registered.
#1 Board AVAILABLE
#2 Board AVAILABLE
#3 Board AVAILABLE
#7 Board AVAILABLE
#4 Board AVAILABLE
#5 Board AVAILABLE
#6 Board AVAILABLE
NOTE: THESE ARE BARE BOARD WITH EMITTERS WITHOUT PINS BUT ONLY SOLDERING HOLES FOR +VE and -NEG FOR YOUR VARIOUS MODS NEED.
Sometime back, I have been asked if I could make a board to be use for Lupine Betty headlight / TL when I start selling the CREE XML U2 bin.
And here is the production upgrade board. It runs on 7 x CREE XML U2 bin. Each emitter has an efficiency of 300 Lumens @ 700mA.
The U2 bin emitter can take up to 3000 mA or 3 amples (slight more is possible but good to stick at 3 ampers).
That put the 7 emitter upgrade board to be at about 7000 Lumens on datasheet calculation.
This board can run to a max of 63 Watts ( max recommended ).
It's the last upgrade you ever need on your Lupine Betty
Its only a small run so below are the number of slots available.
Please post "I'll take it" and I will contact you for PAYPAL payment.
Will then update your handler in the sale thread. Thanks!
Added comments:
1) All the ground and tracks are all gold plated for maximum conductivity and aluminum core for superior heat sinking.
2) This board work really well with the 22 Degree or 26 Degree lens if you are wondering.
I will be also posting some photos here about the potential of this board beside it being use on Lupine Betty.
3) There is a minor typo error on the last pic. It should read 2.99 Amperes and 20.9 Volts.
4) In any case if you need privacy for the purchase, its alright to PM me and send me payment.
Price is $100 shipped registered.
#1 Board AVAILABLE
#2 Board AVAILABLE
#3 Board AVAILABLE
#7 Board AVAILABLE
#4 Board AVAILABLE
#5 Board AVAILABLE
#6 Board AVAILABLE
NOTE: THESE ARE BARE BOARD WITH EMITTERS WITHOUT PINS BUT ONLY SOLDERING HOLES FOR +VE and -NEG FOR YOUR VARIOUS MODS NEED.