I have a 2nd run Ti Tri EDC with a 4500k Light Engine that is 1 week old. I have not carried it and it is flawless. It is the new LE which came with what Mac calls a "status red LED" on the board that we have no idea what for. I placed a very small dab of high temp resistant black silicone over the LED since it would project on the wall when on med or low. The silicone is easily removed if desired but I cant imagine why anyone would want to see that red LED. Mac suggested removing the LED but I did not want to damage anything so covering it was the choice I made since it can be easily undone.
In summary some things to mention about the new board are that the bug is gone which caused a flash on high when switching to the low setting. My 1st run Tri EDC has this and when you switch to low setting a burst of high comes on. This no longer happens with the new board in this light. The board is now protected for reverse polarity but you should confirm this or more simply put the battery in the right way. The new board has a small delay once the button is pressed and has something to do with that status LED. Before covering the red LED it would flicker red a few times then boot up. Now that I covered the LED only the delay is noticed and not the red.
I will include the wrist lanyard and 2 AW IMR 18350 batteries that have seen only 1 charge each. They are also new about a week old. I will also include a small vile of the krytox 50/50 lube from the sandwich shoppe since it is supposed to be the best choice for Ti threads.
The light is amazing and the reason for selling it is that I already have a 1st run Tri EDC which I carry daily. I cant justify 2 and this one seems to just sit on the shelf.
The 2 pocket clips are for a HDS light with the originally narrow spaced holes. Henry at HDS had to warranty replace my light and sent me a new body with the new wide spaced holes making the clips useless to me now. 1 clip is brand new and that is the bezel down version and the other has been carried showing some wear. Included are some nice screws to complete the look.
The light will be $380 with shipping included.
The used bezel up clip will be $35 shipping included
The new bezel down clip will be $50 shipping included
http://img819.imageshack.us/i/dsc03432p.jpg/
http://img824.imageshack.us/i/dsc03433v.jpg/
http://img217.imageshack.us/i/dsc03435mn.jpg/
In summary some things to mention about the new board are that the bug is gone which caused a flash on high when switching to the low setting. My 1st run Tri EDC has this and when you switch to low setting a burst of high comes on. This no longer happens with the new board in this light. The board is now protected for reverse polarity but you should confirm this or more simply put the battery in the right way. The new board has a small delay once the button is pressed and has something to do with that status LED. Before covering the red LED it would flicker red a few times then boot up. Now that I covered the LED only the delay is noticed and not the red.
I will include the wrist lanyard and 2 AW IMR 18350 batteries that have seen only 1 charge each. They are also new about a week old. I will also include a small vile of the krytox 50/50 lube from the sandwich shoppe since it is supposed to be the best choice for Ti threads.
The light is amazing and the reason for selling it is that I already have a 1st run Tri EDC which I carry daily. I cant justify 2 and this one seems to just sit on the shelf.
The 2 pocket clips are for a HDS light with the originally narrow spaced holes. Henry at HDS had to warranty replace my light and sent me a new body with the new wide spaced holes making the clips useless to me now. 1 clip is brand new and that is the bezel down version and the other has been carried showing some wear. Included are some nice screws to complete the look.
The light will be $380 with shipping included.
The used bezel up clip will be $35 shipping included
The new bezel down clip will be $50 shipping included
http://img819.imageshack.us/i/dsc03432p.jpg/
http://img824.imageshack.us/i/dsc03433v.jpg/
http://img217.imageshack.us/i/dsc03435mn.jpg/
Last edited: