This kit will helps solve problems with MiniMag Carley 1499(H) hotwire setup. Most of you with 1499H hot wire setup would have noticed bulb touching lens when turning to fully off position which causes bulb to break if not careful. Another is focusing for that sweet hot spot requires the head to be turned to a point where head just barely catches the last thread and wobbles significantly. This kit eliminates those problems by adding 3mm spacer on top of ceramic bulb holder and redesigning the tail cap to cope with 3mm less thread in the tail area.
Kits work with regular MiniMag with stock head and BHC. With this kit, you require approximately ¾ turn for that optimum hot spot from off position and nearly eliminates head wobbles altogether. Original thread can be found Here. This is ready to ship and not prepaid project.
Kits include:
- One 3 mm aluminum spacer. To be placed on top of ceramic bulb holder.
- One newly designed tail cap. Two designs and two finishes nickel plated or HAII black (please see the photo). Tail cap has spare bulb holder similar to MM tail cap. Spring is not included and you need original MM spring to make it fully functional.
Price: $23.00 per kit include shipping for both finishes and designs.
Payment: Paypal cash or credit card to nongvol1 (at) asianet .co.th Credit Card PP please add 3%
Shipping: Shipped via regular air mail worldwide. Registered mail option please adds $3.00. If you did not choose registered option, I'll not be responsible for lost or undelivered mail. Shipping starts January 3, 2007
It is very important to include your CPF name and design in Paypal.
Thanks,
H22A
Last edited: