Sold/Expired Multi-Sink

[Linger]

I"ll take two more multi-sinks
2x$18
+ $4 shipping
+ $3 tracking
=$43
Linger

 

[Hack On Wheels]

Paypal incoming for:
1x Multi-Sink x1 = US$18
1x 50mm Tri Cree XR-E Optic = US$7/pc
4x Connecting socket, 80C 300V 22AWG, 1 set = $1
2x AX2002 Multi-level Buck driver = $10 (Stock: 6pcs)
and Worldwide shipping = $4
and Registered/Tracking = $3
Total: $56 (+ 4%)

I wasn't sure what this meant: "If you like Registered mail (Tracking), please add extra $3 ( Free ship with connecting socket x1.)"?

Anyway,

 

[greenLED]

greenLED,
It needs 0.3V higher than LED volt-in.
Parallel-Wire 3x XP-G(~0.9A/LED) would be OK, if LED volt-in is close each other.

:thanks: Will do.

 

[Linger]

Please see the added $ for the ax2002 buck driver, and ship it all together.
Thank-you

 

[download]

greenLED, kengps, vestureofblood, Hack On Wheels & Linger,
Items were sent.
:thanks:

 

[olephart]

2 - AX2002 Multi-level Buck driver.
Registered Mail

$27 PP sent.

Thanks

 

[greenLED]

greenLED, kengps, vestureofblood, Hack On Wheels & Linger,
Items were sent.
:thanks:

:thanks: to you! :twothumbs

 

[painfreak76]

Will any of these driver boards power a 20w led? if so, pm me.

 

[download]

olephart, drivers were sent.

greenLED,

painfreak76, any details of 20W LED setting? one or muti LED? Voltage in?....

 

[painfreak76]

one 20w multi emitter single die blue led. 13.5-15v

 

[download]

H. AX2002 Multi-level Buck driver,
It supports the LED voltage up to 23V and 1A output.

 

[cyclopsed]

for
2 x multi sink = 36
5 x con. socket = 5
2 x 8x7135 driver = 18
1x AX2002 = 10
registred mail = 7
SUB TOTAL = 76
+ 4% = 3.04
Total SENT = 70 (ok)

Cheers from the old continent :wave:

PM will be sent now

Paul

edit:
got it, thank you )

 

[SmurfTacular]

Hi, I recently bought your 7135 driver and love it. I thought it was really cool how you can pick what modes you want.

Anyway, I was wondering what is the max-min input voltage this can take? THANKS

 

[download]

cyclopsed & SmurfTacular, :thanks:
(0.25V higher than LED Vin) ~3.4V-6V Max, Good for 1x li-ion & 3x AA to 1x LED.
Please take a look the details below:
https://www.candlepowerforums.com/threads/192925

 

[SmurfTacular]

Ok, so what if I want to do a P7 in a 6D mag? Do you have any drivers for that?

 

[download]

Would you use MC-E instead of P7? Both are same class of LED.
2x Li-ion voltage are close to 6x D cell voltage.
And wire 6x D like this :

 

[SmurfTacular]

I can do the wiring no problem, and sure I can do MTE. I only have H22A's heatsinks, will that work?

If you give me links to the driver, and LED I can buy it right now.

Oh and thanks alot for plethera of info

 

[download]

SmurfTacular,

Endeavour sell MC-E here, https://www.candlepowerforums.com/threads/209463

If the slot of heatsink block the LED, just remove it that will be fine.

The driver is already in your hand, but 8x 7135 mean 1.4A of each LED die (spec. is 0.7A only).
A little too much for it, remove two of 7135 from the board, it will be 1A to each LED die, much more earier loading for it.

For more wiring details, see here: https://www.candlepowerforums.com/threads/201392

 

[olephart]

Can the AX2002 be modified to reduce the high output to about 700 ma?

 

[download]

olephart,
It could be changed, but I don't have the right components. Sorry.