randomactz
Newly Enlightened
- Joined
- Dec 23, 2004
- Messages
- 4
This is the laser I purchased http://www.z-bolt.com/generic33.html The first thing I did was the Stage 1 POT MOD in which case I was turning it clockwise and nothing was happening until eventually turning it until the point where I broke the piece off (DAMMIT) Anyways I took the laser apart and turnd the pot manually until I got a good bright light. The thing was when I would play with it and apply pressure with the flat head the light would get insanly bright I MEAN REALLY. Then as soon as I took the flat head off and release the power button and turned it back on it was back to its original little dot state. Then after playing and prying I got it to stick to a bright setting, but after a hour later and haveing it move aroudn in my pocket the LASER stopped working completly. So then I opened it back up played with the POT and now it is really bright. The thing is when I apply pressure it gets so bright that you can barely stand to look at it and it hard this huge ORA of green glow aroudn the dot (amazing). How do I get this POT and DIODE to work at its fullest capacity without burning things? I wasnt sure if all you do is solder a wire from the pot to the pen case itself and thats it to achieve maximum brightness out of this diode. Any help would be appreciated. Thanks in ADVANCE!!!