Sabrewolf
Flashlight Enthusiast
Ti Prototype is Finished!! The "Chimera Mini" A "Flat" Edc with Built-in Usb Charging
The New Gen 3 Is In! Smaller And Lighter !
Here are some Assemblt pics of the Gen3 with the MicroSD reader
To install the MicroSD card of any size, Just lift up the battery and slid it in
And There you go!
The crosshatching will Not be on the Production Model.. Its the Machinists personal Edc
Action Shot !!
Family Photos
The Crosshatching you see on the Gen 3 will not be in the production model. My Machinist wanted that for his personal light
I edited this thread to have "Clickable" pictures
so it loads up faster on slow internet connections.
This is a light that has gone from a rough, Hand-Made prototype,
to a CNC-Machined prototype. This Edc resembles a small deck
of cards in the overall shape. But the dimensions are smaller.
Specs:
: 2.8" X 2.3" X 1/2in. Or 72mm X 60mm X 12mm Old Specs
: 2.7" X 2.2" X 0.4" Thick Or 68.8mm X 56mm X 10mm < Gen 3 Specs
: MC-E Led in Coolwhite (~400 Lumens) Or,
MC-E Led in Warmwhite (~350 Lumens)
: Lithium Polymer 800mA Battery rated for 10c or 8Ah discharge
: MaxFlex3 Driver configured for 1200mA Max Drive Current,
Driving the led with 600Ma per die on high.
Setup for UiP mode (Portable/Flashlight mode)
: 5 Level Output With High Being One Click Away
: Led for battery voltage and charging status
:Glow powder will be behind the lens and charged by the led
(color choices are ocean blue, red, orange, green, purple,
white, and pure blue) More info at www.Glowinc.com
: Built-In USB Charging Circuit with a charge rate of 100mA
(Pdf of circuit: http://www.sparkfun.com/datasheets/Components/MAX1551-MAX1555-1.pdf)
The Prices are not "Set in Stone"..
$350 for Aluminum in 6061 (Anodized Black HAIII)
$400 for Titanium in Grade 2 (99% pure Ti W/Satin Finish)
Both will come with a Lanyard and Charger for the Home.
Options: (Prices not set)
:Money Clip (Custom holes will be drilled into the backside of the case)
:1/4-20 Mounting for Camera Tripod (Custom threaded from backside)
:MicroSD Memory Card Reader/Writer Builtin to Gen 3 Production Model
There is NO Extra Charge for the option. You just take apart the light
And slide in your own MicroSD card up to a 32Gig Capacity.
:Artwork (Done by "Pontiaker")
:Tritium Markers
More options to come
I have Re-Organized the pictures in a Present to past timeline...
That is the MicroSD 16 Gigabyte option.
It will show up as a drive letter when you
plug the light into your computer to charge.
You could run a Bootable Linux Distro from
it if ya wanted "Readyboost" compatible
Keep in mind, this is a prototype, and the
final product will be Much Cleaner looking.
Group Shots
Gen 2 Titanium
Gen 1 Titanium
Gen 1 Aluminum
Handmade Aluminum with
Titanium top cover
Machining of Handmade Proto
Beamshots for All versions
Those of you who are interested,
Please let me know
Okeedokee, Here is the Member List:
1. Hamheart
2. Fstop
3. kaichu dento
4. Stillphoto
5. Enzo Morocioli
6. Karlthev
7. Morelight
8. Ledaholic
9. Elakazam
10.MCMC
11 Christoph
12 Applevision
13 Starship
14 Brighterisbetter
15 Xflash
16 Monkeyboab
17 Roboholic
18 Scout24
19 JetskiMark
20 Nfetterly
21 Acourvil
22 Iconoclast
23 MWClint
SuperDuper Waaaahoooooo!
The New Gen 3 Is In! Smaller And Lighter !
Here are some Assemblt pics of the Gen3 with the MicroSD reader
To install the MicroSD card of any size, Just lift up the battery and slid it in
And There you go!
The crosshatching will Not be on the Production Model.. Its the Machinists personal Edc
Action Shot !!
Family Photos
The Crosshatching you see on the Gen 3 will not be in the production model. My Machinist wanted that for his personal light
I edited this thread to have "Clickable" pictures
so it loads up faster on slow internet connections.
This is a light that has gone from a rough, Hand-Made prototype,
to a CNC-Machined prototype. This Edc resembles a small deck
of cards in the overall shape. But the dimensions are smaller.
Specs:
: 2.8" X 2.3" X 1/2in. Or 72mm X 60mm X 12mm Old Specs
: 2.7" X 2.2" X 0.4" Thick Or 68.8mm X 56mm X 10mm < Gen 3 Specs
: MC-E Led in Coolwhite (~400 Lumens) Or,
MC-E Led in Warmwhite (~350 Lumens)
: Lithium Polymer 800mA Battery rated for 10c or 8Ah discharge
: MaxFlex3 Driver configured for 1200mA Max Drive Current,
Driving the led with 600Ma per die on high.
Setup for UiP mode (Portable/Flashlight mode)
: 5 Level Output With High Being One Click Away
: Led for battery voltage and charging status
:Glow powder will be behind the lens and charged by the led
(color choices are ocean blue, red, orange, green, purple,
white, and pure blue) More info at www.Glowinc.com
: Built-In USB Charging Circuit with a charge rate of 100mA
(Pdf of circuit: http://www.sparkfun.com/datasheets/Components/MAX1551-MAX1555-1.pdf)
The Prices are not "Set in Stone"..
$350 for Aluminum in 6061 (Anodized Black HAIII)
$400 for Titanium in Grade 2 (99% pure Ti W/Satin Finish)
Both will come with a Lanyard and Charger for the Home.
Options: (Prices not set)
:Money Clip (Custom holes will be drilled into the backside of the case)
:1/4-20 Mounting for Camera Tripod (Custom threaded from backside)
:MicroSD Memory Card Reader/Writer Builtin to Gen 3 Production Model
There is NO Extra Charge for the option. You just take apart the light
And slide in your own MicroSD card up to a 32Gig Capacity.
:Artwork (Done by "Pontiaker")
:Tritium Markers
More options to come
I have Re-Organized the pictures in a Present to past timeline...
That is the MicroSD 16 Gigabyte option.
It will show up as a drive letter when you
plug the light into your computer to charge.
You could run a Bootable Linux Distro from
it if ya wanted "Readyboost" compatible
Keep in mind, this is a prototype, and the
final product will be Much Cleaner looking.
Group Shots
Gen 2 Titanium
Gen 1 Titanium
Gen 1 Aluminum
Handmade Aluminum with
Titanium top cover
Machining of Handmade Proto
Beamshots for All versions
Those of you who are interested,
Please let me know
Okeedokee, Here is the Member List:
1. Hamheart
2. Fstop
3. kaichu dento
4. Stillphoto
5. Enzo Morocioli
6. Karlthev
7. Morelight
8. Ledaholic
9. Elakazam
10.MCMC
11 Christoph
12 Applevision
13 Starship
14 Brighterisbetter
15 Xflash
16 Monkeyboab
17 Roboholic
18 Scout24
19 JetskiMark
20 Nfetterly
21 Acourvil
22 Iconoclast
23 MWClint
SuperDuper Waaaahoooooo!
Last edited: