Agreed, it is good to see in the SR95S-UT.
FYI, I have checked with Olight, and they have no plans to introduce thermal output management into the standard SR95 (SST-90) model.
Happy holidays everyone. :santa:
It looks like Olight already have this feature in SR91. Originally Olight spec SR91 High runtime to be 3 hours. It seems to be assuming ATM will kick in. Wonder how Olight decide which model to have this ATM feature.
Quote from SR91 manual as below:
"SR91 increased ATM(Active Thermal Management)function for improving the model's security, stability and
applicability under long time running on high illumination
level. This improvement will make the model be
advantaged as follows,
1.The model can control the current decreased smoothly
to slower inside temperature's rising, so that less heat
accumulated when ATM start up
2.Over-heat protection. When the temperature of head
inside is over 70℃, the circuit will decrease the current
automatically to avoid possible danger caused by high
temperature.
3.Anytime the model will keep 3 minutes running at it's
highest level and then start up the ATM function. You can
start the model again when you need the highest level for
illumination.
4.The runtime can be extended as 3 hours under high level
with ATM function.
Note: Please note the high level means the three
adjustable output's high output, highest level means the
three minutes' output when model running at high level
before ATM start up(just as item 3). The highest output will
be lowered when ATM start up automatically but it still
under high level output."