gl22man
Enlightened
The light will be a bump in the night light, i like how each light allows for the light to come on in high mode. i like the look and description of each light as well as the low $ amount. Help me choose my next light guys.
Solarforce M6
*Description
Uses CREE XM-L (T6) high power output LED
Body made of T6061 T6 aluminum alloy in HAIII (dull black) finish with strengthened anti-wearing and corrosion features
Aluminum alloy reflector with mirror-like reflective surface for maximal reflectivity and focusing power
Strengthened glass lens with anti-reflective coating for ultra high transparency and light transmittance
Forward click tail-cap switch
Water-proof (Standard IPX-8)
Current-regulated and stable output with input voltage range of 2.7- 9V
Battery type: 18650 x 1 or 2 or CR123A x 2 (Note: the flashlight will become hot with CR123A batteries)
Special head-controlled 2-level output (and strobe mode) design
Head in tightened position: high output (100%)
*Head in loosen position: low output - strobe - repeat (press slightly the tail-cap
switch or re-activate the flashlight to switch between the two modes)
When the flashlight is turned off for 3 sec, it will remember the lastly used output mode and go to that mode direct when being turned on again
*Lumen rating and runtime (with 18650 x 1)
*100%: 550 lumens, 110 minutes
*10%: 55 lumens, 20 hours
*Low battery voltage alert function: when the overall input voltage drops to 2.8V, the light will automatically switch to the candle-mode (8 lumens)
*Built-in reversed battery polarity circuit protection
Length x diameter (head, battery tube, tail-cap): 142 x 36 x 25.4 x 29 mm
Weight (without batteries): 142 g
JETBeam JET-III M Cree XM-L
Features:
* CREE XM-L LED
* Maximum output of 450 lumens
* Maximum runtime of up to 200 hours
* Intuitive user interface allows rapid switching between two modes
* User-defined mode allows for customized brightness levels and a multitude of functions
* Stainless steel crenulated bezel effectively protects against impacts and can also be used as a glass breaker or defensive tool
* Removable two way pocket clip has an anti-roll function
* Compatible with both CR123 lithium and 18650 rechargeable Li-ion batteries
Specications:
* LED: CREE XM-L (T6)
* Reflector: Aluminum reflector
* Lens: Coated mineral glass
* Material: Aero grade aluminum alloy
* Finish: HA III Military grade hard anodized
* Battery: Two CR123 (RCR123) batteries or one 18650 rechargeable battery
* Dimensions: Head diameter 33mm, tube diameter 25.4mm, total length 138mm
* Weight: 118g (without battery)
* Waterproof: IPX-8 standard waterproof
* Accessories: Lanyard, spare rubber tailcap switch cover, spare O-ring
Output & Runtime: Highest mode: 450 ANSI lumen, 1.5 Hours
Lowest mode: 0.3 ANSI lumen, 200 Hours
Solarforce M6
*Description
Uses CREE XM-L (T6) high power output LED
Body made of T6061 T6 aluminum alloy in HAIII (dull black) finish with strengthened anti-wearing and corrosion features
Aluminum alloy reflector with mirror-like reflective surface for maximal reflectivity and focusing power
Strengthened glass lens with anti-reflective coating for ultra high transparency and light transmittance
Forward click tail-cap switch
Water-proof (Standard IPX-8)
Current-regulated and stable output with input voltage range of 2.7- 9V
Battery type: 18650 x 1 or 2 or CR123A x 2 (Note: the flashlight will become hot with CR123A batteries)
Special head-controlled 2-level output (and strobe mode) design
Head in tightened position: high output (100%)
*Head in loosen position: low output - strobe - repeat (press slightly the tail-cap
switch or re-activate the flashlight to switch between the two modes)
When the flashlight is turned off for 3 sec, it will remember the lastly used output mode and go to that mode direct when being turned on again
*Lumen rating and runtime (with 18650 x 1)
*100%: 550 lumens, 110 minutes
*10%: 55 lumens, 20 hours
*Low battery voltage alert function: when the overall input voltage drops to 2.8V, the light will automatically switch to the candle-mode (8 lumens)
*Built-in reversed battery polarity circuit protection
Length x diameter (head, battery tube, tail-cap): 142 x 36 x 25.4 x 29 mm
Weight (without batteries): 142 g
JETBeam JET-III M Cree XM-L
Features:
* CREE XM-L LED
* Maximum output of 450 lumens
* Maximum runtime of up to 200 hours
* Intuitive user interface allows rapid switching between two modes
* User-defined mode allows for customized brightness levels and a multitude of functions
* Stainless steel crenulated bezel effectively protects against impacts and can also be used as a glass breaker or defensive tool
* Removable two way pocket clip has an anti-roll function
* Compatible with both CR123 lithium and 18650 rechargeable Li-ion batteries
Specications:
* LED: CREE XM-L (T6)
* Reflector: Aluminum reflector
* Lens: Coated mineral glass
* Material: Aero grade aluminum alloy
* Finish: HA III Military grade hard anodized
* Battery: Two CR123 (RCR123) batteries or one 18650 rechargeable battery
* Dimensions: Head diameter 33mm, tube diameter 25.4mm, total length 138mm
* Weight: 118g (without battery)
* Waterproof: IPX-8 standard waterproof
* Accessories: Lanyard, spare rubber tailcap switch cover, spare O-ring
Output & Runtime: Highest mode: 450 ANSI lumen, 1.5 Hours
Lowest mode: 0.3 ANSI lumen, 200 Hours