ledmitter_nli
Flashlight Enthusiast
- Joined
- Jun 4, 2012
- Messages
- 1,433
Been trying to set the indicator light to ON when the light is off so I can find where it is at night.
I use AA alkalines (meant to be one of my survival headlights). The usual instructions are to open the tail cap 1/4. Press the switch button and while pressing down tighten the tailcap closed then open again, release switch button, tighten tailcap.
Same steps demonstrated for the Wizard Pro V2.
https://www.youtube.com/watch?v=vZujelW3s0A
Except this isn't working for my light.
Also my Tiara indicator light flickers faintly in-between the 4 second flashes (can see switches faint flicker in moonlight mode 1)
So what do you guys think? A return?
Can anyone else test using AA alkalines?
Edit: Also tried with an AA Energizer Lithium. Same thing.
I use AA alkalines (meant to be one of my survival headlights). The usual instructions are to open the tail cap 1/4. Press the switch button and while pressing down tighten the tailcap closed then open again, release switch button, tighten tailcap.
Same steps demonstrated for the Wizard Pro V2.
https://www.youtube.com/watch?v=vZujelW3s0A
Except this isn't working for my light.
Also my Tiara indicator light flickers faintly in-between the 4 second flashes (can see switches faint flicker in moonlight mode 1)
So what do you guys think? A return?
Can anyone else test using AA alkalines?
Edit: Also tried with an AA Energizer Lithium. Same thing.
Last edited: