ok , let's try
The idea is to modify G2 tail cap to let it move forward only few [1-3] millimeters like in original LOTC.
All [1] parts can be found in every home i.e. paper clip
Tools: drill [best with revolutions control] and drill bit [1-2 mm] (I broke 3 bits but that was my fault
, metal file, vise [I hope it means what I think about]
Cut paper clip to the length of thread of the screw in tail cap [it can't be too thick or too thin!] and round both end with metal file. Check if You can screw it into the cap.
Drill oval hole [see picture - it isn't quite oval yet,must be 1mm more in the other direction than spring ]
Forgive me poor quality of this hole, I didn't have proper tools /ubbthreads/images/graemlins/wink.gif
Screw all into tail cap [first turn is important and a bit difficult - rest of the paper clip can help] to the end and ... try it
Now I'm thinking about marks on tail cap and flashlight [ don't want to cut but drill maybe?]