Delta_FHInX
Newly Enlightened
- Joined
- Feb 2, 2004
- Messages
- 119
I have modified a Streamlight Twin-Task 2D with 5 red and 5 deep red leds. The Main incandescent was replaced with Luxeon 3 Emitter.
These are the steps I took to modifiy this light:
1. Took out the bulb.
2. Took out leds by seperating circuitry glued onto body.
3. Replace white leds with 5 red leds and 5 deep red leds.
4. Mounted white Luxeon 3 Emmiter but wouldn't center correctly so I tried to force it and the leg broke off. I then ordered and Luxeon Star, but didn't fit. I went back to the original emmiter and tore the head off and removed phospor coating.
5. Mounted blue Luxeon 3 Emitter and soldered on.
6. Replaced reflector and bezel of the light.
This is the end result:
macro close-up
level 1
level 2
level 3
torch
These are the steps I took to modifiy this light:
1. Took out the bulb.
2. Took out leds by seperating circuitry glued onto body.
3. Replace white leds with 5 red leds and 5 deep red leds.
4. Mounted white Luxeon 3 Emmiter but wouldn't center correctly so I tried to force it and the leg broke off. I then ordered and Luxeon Star, but didn't fit. I went back to the original emmiter and tore the head off and removed phospor coating.
5. Mounted blue Luxeon 3 Emitter and soldered on.
6. Replaced reflector and bezel of the light.
This is the end result:
macro close-up
level 1
level 2
level 3
torch