easilyled
Flashaholic
Thanks stoli67, Dave.
Yes, beauty is very much in the eye of the beholder and there is no wrong or right.
Yes, beauty is very much in the eye of the beholder and there is no wrong or right.
Show your lights with trits!
- Thread starter zipplet
- Start date
Help Support Candle Power Flashlight Forum
dlmorgan999
Flashlight Enthusiast
Your lights, along with the ones from mohanjude are the ones that set me on the path of getting some of my own.
mohanjude
Flashlight Enthusiast
Your lights, along with the ones from mohanjude are the ones that set me on the path of getting some of my own.
Looks like you got "trit-fever" too - I know egrep wants to be cremated in a trit urn but I am seriously addicted to trits and handling Over 600 trits and counting... The thought is starting to get me worried.
I need to stop on my trit mission but after seing your Trit 51.. It has made me go crazy again. Just been milling a SVM body with 24mm x3mm trits along the length of the body.. Massive trits look a lot brighter than the small trits.
Need trit rehab.
Last edited:
dlmorgan999
Flashlight Enthusiast
That's for sure! After seeing your V10R, I'm thinking about having Jeff Hanko mill some additional slots along the length of the battery tube!
:devil: I like your idea of the 24x3mm trits. Hmmmm...I just did a quick count and I'm at only at 173 trits so I have quite a bit of catch up to do.
smarkum
Enlightened
Well, I don't have anywhere near 51 trits . . . but here are my contributions:
dlmorgan999
Flashlight Enthusiast
Those look great! What's the light in the middle?
stoli67
Enlightened
A Gavina! Shelby's baby!
smarkum
Enlightened
Yes! The GAVINA -- My favorite light for so many reasons!
egrep
Enlightened
egrep
Enlightened
mohanjude
Flashlight Enthusiast
SVM body custom made with 3mm x24mm trits along the length of the body. Ever since I saw the large trits I wanted to embed them in the machined area along the SVM body. I found out that the body allowed the depth of 2.6mm to be milled. By making some minor adjustments I have kept the external diameter the same and managed to embed the large trits which are very bright.
dlmorgan999
Flashlight Enthusiast
Nice unique light Mohan - both the large trits and the custom tail switch! :thumbsup:
easilyled
Flashaholic
Very impressive Mohanjude. The large trits make the ones that I'm used to look like little toys by comparison. :bow:
mohanjude
Flashlight Enthusiast
Thanks for the encouragement. I remember one of the forum members suggested this idea sometime ago. Cant seem to find that trits. I looked for flat trits but gave up looking for them. I have been determined to get this mod done using the available large trits.. the next mod will be doing the anodised tube done as well with the mega trits.
mohanjude
Flashlight Enthusiast
Custom bodies make it possible go mad with trit slots and sizes.. Very destructive on the wallet especially when you got a milling machine with 3 axis DRO... Like a kid in the sweet shop.
stoli67
Enlightened
With a custom body someone will get up to 60 trits soon.....
Very nice indeed!
Very nice indeed!
SVM body custom made with 3mm x24mm trits along the length of the body. Ever since I saw the large trits I wanted to embed them in the machined area along the SVM body. I found out that the body allowed the depth of 2.6mm to be milled. By making some minor adjustments I have kept the external diameter the same and managed to embed the large trits which are very bright.
easilyled
Flashaholic
smarkum
Enlightened
That is AMAZING Anodizing! It looks GREAT on that light! Way to go!
:wave:
:wave:
Tain
Enlightened
- Joined
- Dec 14, 2011
- Messages
- 373
SVM body custom made with 3mm x24mm trits along the length of the body. Ever since I saw the large trits I wanted to embed them in the machined area along the SVM body. I found out that the body allowed the depth of 2.6mm to be milled. By making some minor adjustments I have kept the external diameter the same and managed to embed the large trits which are very bright.
Amazing!! Mega Trits!!
