Recent content by fandango

Gather App
Inventry
Candle Power Forums

Help Support Candle Power:

  1. F

    driver for 3x cree t6

    hi, just had a play with dx sku 26106 again,it is putting out at its max,18 volts what effect on the leds would that have,thanks for reading
  2. F

    driver for 3x cree t6

    thank you luminater for you rapid reply,i think i may just get this to fit,cheers
  3. F

    driver for 3x cree t6

    hi,can some kind person tell just how much voltage could i put into this convigaration which is 3 cree xm-l-t6 in parallel the original driver went south so got one of dx a sku 26106 but haveing problems with it,it puts out 18v from 1 or2 18650 the leds are ok if i wire them to a single 18650...
  4. F

    cree xml t6

    can anyone suggest the best driver to use in a light useing 3x cree t6,powered by 2 18650,the driver in my torch as gone bad but i do not know its details,many thanks.
  5. F

    blue or grey

    thanks for your reply monocrom,really thought i had posted in correct place a big sorry
  6. F

    blue or grey

    hi everyone,please could someone tell me the difference between blue and grey 18650s,and have you any preference with regards to trustfire or ultrafire and finnally which brand is the best,thanks for reading.
  7. F

    TRUSTFIRE CHARGER EXPLODED! URGENT. Need QUALITY charger.

    thanks for your quick reply vegas,the links you provided are very informative,everyone with this type of cell would do well to read them.
  8. F

    TRUSTFIRE CHARGER EXPLODED! URGENT. Need QUALITY charger.

    hi every one,just a thought,i have a uniross charger that does aa and aaa with an output of 6.2 volts, would that be to high for charging 18650s the charger for them (crappy chinese joby) puts out 4.22 given that the uniross is charging a 1.2 volt cell would it be to much for the 18650s???
  9. F

    Looking for a driver...

    sorry thats come across as jibberish,but all the info is there i think
  10. F

    Looking for a driver...

    hi17mm 1000mAh 5-Mode with Mode-Memory LEDDriver Circuit Board for Cree XR-E Emitters (0.9~4.5V Input) Item Number 15880, i have ordered something a driver off dx just like what you are after,
  11. F

    please advice on a P7 quad LED thrower

    its not a p7 but the sku 16538 should fit the bill,it uses a cree r2 @230lum and is a really good thrower out to 80-100 yards,
  12. F

    SSC P7 900 lumens??

    i bought mine off dealextreme,just the torch was $38 inc del which took about 10 days if i remember rightly,
  13. F

    swapping leds

    thanks for the quick replys and concern,i was not thinking of blundering in without taking care,my intension was hopefully try the p7 along with the long throw reflecter of the r2,i have access to machineshops should i need to make heatsinks ect,its just that the temptation to have a look has...
  14. F

    swapping leds

    hi everyone, looking for advice on how to strip torchs,i have a uniquefire fitted with a cree r2 which is a very nice thrower and a mte fitted with a ssc p7 which is a powerfull spread,thought i might have a play and see if i could fit the p7 were the r2 is just to see what kind of a thrower i...
  15. F

    swap cree r2 for ssc p7

    first of all,i was not aware i had posted in the wrong place so sorry for that. i have a uniquefire fitted with a cree r2,it is a good thrower but could do with a bit more punch,also its good harmless fun messing about
See more

Latest posts

Back
Top