Recent content by LFP11

Candle Power Forums

Help Support Candle Power:

  1. L

    Fenix TK75 (3xXM-L U2, 4x18650) Review: RUNTIMES, BEAMSHOTS, VIDEO and more!

    TK75 fits just in TN31 holster. Not in TN30 holster.
  2. L

    Pictures, Impressions - Fenix TK76 (2800lm, 50800cd)

    There is something wrong in runtime: Single head TK76 7lm 200h with 4x18650, TK51 10lm 420h with 3x18650:ooo:
  3. L

    TK-75, "Condensation/Fog under lens,again"

    I just put silica gel bag in chamber and close tail cap. You must use dry silica gel. I put my small "do not eat"(comes ith electronic devices) bags to 120C (about 240F) owen for 1 h to make sure that these are dry.
  4. L

    TK-75, "Condensation/Fog under lens,again"

    I use my TK75 first time after summer four days ago. Temperature was +10 celsius and after 15 min on turbo inside lens wás 10x20mm fog asea. I put dry siligagel bag inside battery camber (three days) and yseterday temp was again +10C and there wasn´t any fog. So head is not hermetic sealed...
  5. L

    LSD NiMH on a hobby charger

    Check chargers -delta peak value. In many chinas charger Default is 7mV/cell. Better value is minium 5mV/cell. Here is a typical chargers manual: http://www.hobbyking.com/hobbyking/store/uploads/ACCUCEL_manual%282%29.pdf see page 9.
  6. L

    Like the Fenix L1T but in the 140 lumen range

    Maybe JETBeam BA10 XP-G R5 Tactical. 2 modes of output: 12 and 160 lumens.
  7. L

    Fenix TK75(3*U2 LEDs, 2600 lumens)

    This coating is same as is used on eyeglasses:
  8. L

    Fenix TK75(3*U2 LEDs, 2600 lumens)

    I test my TK75 yesterday. I use it on turbo 20min and arter that it step down to high. After that i can put it back to turbo just with one clik (no need to shut it off). Outside temp was -5 C (23 F) and wind was about 2-3m/s. Light was after 10-15min about 25C ( 77F) and temp was in balance (no...
  9. L

    Fenix TK75(3*U2 LEDs, 2600 lumens)

    Not again:scowl:. I just order my TK75. My TK40 has this fog problem when air is cold (under 0 C). I have use Siliga Gel (those small paper bag with text "Do not eat") to make my TK40 less foggy. You must first dry Siliga Gel. 2-3h in owen temperature 110-120 degrees Celsius. After drying put...
  10. L

    Which Fenix flashlight do you have ?

    TK-41 is nearly same light (but smaller) but it use 8xAA . TK-60 use D cells.
  11. L

    Can the Fenix TK 30 take the recoil of 375 H&H

    Here is one table about rifles recoil: http://www.chuckhawks.com/recoil_table.htm
  12. L

    Tips on balancing Eneloops before charging?

    Discharge time was overnight. End current was very small less than 1mA so 0.6V was end and rest voltage. I have use this just old cells before I bought C9000.
  13. L

    Tips on balancing Eneloops before charging?

    I have use for AA 1 Ohm resistor + diode. End voltage is 0.6V. For AAA maybe 4.7 Ohm + diode.
  14. L

    XTAR WP2 II ...not impressed.

    I just charger Panasonic NCR18650A (3100mAh)unprotected with hobby charger. First with fast charge program (just 0.5A CC, no CV, end voltage 4.2V). OCV was 4.14V after charge. Then I charge it again with normal program( 0.5A CC, 4.2V CV and CV end current was 0.1A). Normal program charges 35mAh...
  15. L

    Best way to long-term store li-ion battery`s

    Re: 18650 Li-ion Keep in freezer ?? Recommended storage charge level is 40%: http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries Cell voltage is then 3.8-3.9V. Many Hobby chargers has storage program and this charger till 3.85V.

Latest posts

Back
Top