Sold/Expired FS: Modded KL1, adapter and battery packs

Hi all

I have the following for sale.

see picture



2. Arc 123 TSP. nice HA, like new condition. Perfect, never carried. (no kroll) ($25)
3. (2) 2AA pack cut to be a 1AA TSP. bare aluminum, polished once (no kroll) ($10 for both)
4. (2) 2AA TSP. bare aluminum, polished once (no kroll) ($10 for both)
take 2, 3 and 4 for $30 and get extra kroll

5. Rothrandir's adapter from E series head to Arc based bodies. Anodized HA3, lighter in color than average. A bit used. $35 (still available)

6. 18650 custom battery pack made by DSpeck. compatible with Arc LS head. Not compatible with e series head, unless you got adapter (like num 5). Not compatible with e series tail. It has its own tailpack, housing kroll tail.
I will include spacers so you can fit 1 CR123 or 1 AA inside.
asking $48
like pic below (sorry for fuzzy pic) illustrates the KL1, adapter and the pack.


7. (2) Brand new Lamina BL4000 + its optic (the tightest one) $28 $20 each (take both and get an extra lamina (soldered wires for testing))
8. (1) Brand New Lux V bin WX1T $36 $32 $27 each



9. (18) warm white 5mm led. $.30 each or $5 for all


purchase more than $50 and get:
(.) ugly (really, trust me) modded E1E head to luxeon. Based on lambda's EZ luxeon mod (with LARGE inductor and a switcher)

purchase totalling $150 will get you a like new infinity ultra (yea, thats right, an ultra !!!! )

Picture below

http://img71.imageshack.us/my.php?image=p10100012iu.jpg


PM for offer. Accepting trade for mclux PD (yea right). Seriously, this sale thread is now made as my PD fundraiser

thanks for looking

Is modded KL1, the older style KL1 with optic, or was a reflector installed?

Bill

If you split it up I might be interested in the ugly modded e1e... is it possible to open up and replace luxeon on it?

post edited to clarify

bill, it had optic, but i replaced it to SO20XA reflector

Isaac, i dont think it is possible to change the luxeon again. the module has been potted, the lux has been surrounded by AA to ensure it stays there

Ah ok. I'll pass as I was gonna swap the luxeon to a S1JC luxIII cyan..

bump

Bump.
now sells separately. Added a couple more items.

Shiftd - PCHAT sent re: #6
Hey, is that a LL-Cr2 there?

PM with a question sent.

47, nope. Bronze Ion there

revolvergeek, pm replied

I want #5...I think. One question though will this work on the 2aa arc body?

Thanks
Yaesumofo

Hi Yaesu

Yes, it works with 2AA arc body. That is the whole reason it is made in the first place.

Item #8 added.

"8. PR-T head housing TWOH luxeon III, DB400. Perfect for running from single R123. DD from single CR123 gives a lower output. Condition is good. It has been in my keychain, so some of the anodizing got scratched off.
Parts cost about $65, asking $50"

This is a Downboy that can run on 6 volt/2x123/4xAA, right? If so I will take it.

Thanks,
Danny

yep, it does.
you got it

Cool, I have a Dspeck made 4AA E-series style barrel that will work nicely on.

Paypal incoming.

Thanks,
Danny

bump

bump. Price further reduced. desperate for a PD

Last bump

Welp, ordered a PD. Willing to trade for CR123 battery or NEW R123 or CR2.

pm for offers