OK, here are some of the final few that I have.
1. Arc LS body kits. Body and twisty tail unanodized. Head anodized. Tail is 'skinny' twisty. Includes 2 heatsink, O-rings, bezel screw ring that holds your reflector/collimator in place, twistie tail, body, head. All you do is to add your emitter (i.e. Cree), reflector and wire it if you do direct drive.
A direct drive CREE using li-ion will be killer on this unit. ORB RAW is doing this but this will have much longer run times.
$49 shipped each.
Highly recommend that you polish the unanodized parts to make it nice and shiny.
Two units FS.
2. As above but everything anodized. Anodization is complete but not visually perfect. i.e. a bit of swirls on the twisty tail. Have both skinny and fat twisty tail. Your choice.
$49 each.
Two units FS.
3. Original heatsinks for the Arc LS. $1 each if purchased with other stuff here. If not, please add postage.
4a. Twistie tails $35 each. Anodized.
4b. Clickie tail. $30 each. Clickie itself not included meaning you can supply your choice of clickie such as RAM switch or the traditional Kroll switch.
5. NX-01. $15 each. Got only 3 left for sale. Sorry about the price. Not sure I really want to part with these.... I think these are supposed to work very well with CREE.
6. 2AA twistie tail. $45. Anodized. I think I have only one left.
7. Just to throw into the mix.
Old Tekna 2AA. Yellow body. $10. works.
Old Tekna Mono-Lith. $10. works.
$15 for both.
8. Luxeon SXOH 1 watter. $14 for two.
9. Original Arc LS O-ring from Arc. $1 each.
Please PM if interested.
By the way, will also take trades in Benchmade 550 or 555 smooth edge w. 154CM steel.
Thanks,
Mo
1. Arc LS body kits. Body and twisty tail unanodized. Head anodized. Tail is 'skinny' twisty. Includes 2 heatsink, O-rings, bezel screw ring that holds your reflector/collimator in place, twistie tail, body, head. All you do is to add your emitter (i.e. Cree), reflector and wire it if you do direct drive.
A direct drive CREE using li-ion will be killer on this unit. ORB RAW is doing this but this will have much longer run times.
$49 shipped each.
Highly recommend that you polish the unanodized parts to make it nice and shiny.
Two units FS.
2. As above but everything anodized. Anodization is complete but not visually perfect. i.e. a bit of swirls on the twisty tail. Have both skinny and fat twisty tail. Your choice.
$49 each.
Two units FS.
3. Original heatsinks for the Arc LS. $1 each if purchased with other stuff here. If not, please add postage.
4a. Twistie tails $35 each. Anodized.
4b. Clickie tail. $30 each. Clickie itself not included meaning you can supply your choice of clickie such as RAM switch or the traditional Kroll switch.
5. NX-01. $15 each. Got only 3 left for sale. Sorry about the price. Not sure I really want to part with these.... I think these are supposed to work very well with CREE.
6. 2AA twistie tail. $45. Anodized. I think I have only one left.
7. Just to throw into the mix.
Old Tekna 2AA. Yellow body. $10. works.
Old Tekna Mono-Lith. $10. works.
$15 for both.
8. Luxeon SXOH 1 watter. $14 for two.
9. Original Arc LS O-ring from Arc. $1 each.
Please PM if interested.
By the way, will also take trades in Benchmade 550 or 555 smooth edge w. 154CM steel.
Thanks,
Mo
Last edited: