Sold/Expired WTB Surefire compatable CR2 HA body

I was answering a thread and it disappeared.

I'm looking for a couple HA SF compatable CR2 bodys a 2xCR2 would be nice also.

Thanks for any help.

Hi,

I presume you are looking for E-Series tubes.

The Aleph Powerpacks can come in handy if you know where to look.
Here is a Li-ion 17500 body that can be used with 2xCR2`s aswell.
Its black so it wont match any of the Nat Surefire heads.

They used to have Single cell CR2 packs,but they are long gone,not sure if they will replenish the stock.



Another more costly solution is to buy parts here.
What makes it more costly is the
TnC SF Natural HA power pack to fit Aleph heads
You need this to mate the Powerpacks they sell to your favorite E-Series head.

TnC SF Natural HA 18500 battery tube (Also fits 2xCR2 batteries)
TnC SF Natural HA CR2 battery tube



All these tubes fit the E-series Tailcaps to my knowlege,but i havent tryed yet.So dont take my word for it.
Maybe someone else can comment on this.




Regards,
Benny

okay, now I'm confused.

The powerpack says this:

TnC SF Natural HA power packs use TnC canisters. These power packs fit on Aleph heads. This power pack will not fit on TnC SF-Series heads. They will fit on E series Surefire heads, but not with the elctronics or Lamp assemblies installed. The power pack also will not work with Aleph LEs.

Click to expand...

What I want to do is put a KL4 head on a single CR2. I have one of the Alphe CR2 bodies with one on it and I love it. It's my EDC light with a spare batery close by.

It doesn't look to me like that linked stuff will work (or am I a complete idiot and can't comprehend it?

Will a CR2 cell handle the current of a KL4?

There is a TnC SF Natural HA power pack
to fit Aleph head
click here

add this TnC CR2 HA body
click here

The TnC bodies, heads and electronics are excellent; you could add a
a TnC power Pack for TNc and your choice of heads and LE's, as well!

BD457 said:

okay, now I'm confused.

The powerpack says this:


What I want to do is put a KL4 head on a single CR2. I have one of the Alphe CR2 bodies with one on it and I love it. It's my EDC light with a spare batery close by.

It doesn't look to me like that linked stuff will work (or am I a complete idiot and can't comprehend it?

Click to expand...

My bad...looks like this only works with the McGizmo Aleph series.


Sorry for the confusion.





Regards,
Benny

I may be confused, too...........PM Bogus1 or PM me for Eric's e-mail and double check if the KL4 will work?

Sorry for more confusion,

Jeff

I HAVE an Alphe CR2 body with a KL4 head on it and it works wonderfully.

That's why I'm looking for another one. I especially like that it's indented so it can be held firmly while using your hand to do other things.

I'd really like to get another Alphe CR2 body, but I'll take what I can get. A 2xCR2 body would be outstanding.

If you can settle for a black 2xCR2 body the shoppe has some left.


Benny

I use a KL4 head with custom CR2 twisty. Works, but not for long and the battery shuts off by itself. Consider replacing the emitter for a more efficient emitter which the CR2 battery can run fine...

Also, 2xCR2 will be 6v, but your current-drain is about 1C and that will depend on your battery type used.
Consider a single (R)CR123 3.6v @700mAh ?

Ha would be prefered, but if I must, I'll do that as a last resort.


But.......... What's "the Shoppe?

I sure wish I knew more about all the current, emiters, etc.
I'm using a single Cr2R. I can use two of those in a 2cell body without harming the KL4 or batteries right?

The shoppe is here : Sandwich Shoppe


Using two RCR2`s is a big NO NO!!
I blew my KL4 using that combo,poof and magic smoke...


2xRCR2`s is 8,4V when fully charged and the KL4 only supports 6V.
Using two CR2 primaries would work,but im not sure about the current draw...
Should be ok.



Benny