• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired FS: Cutdown Mini Mag, Pewter, Nexgen 750ma

Drewfus2101

Enlightened
Joined
Jul 16, 2007
Messages
341
Location
N/A
Pics to follow.

- Pewter AA Mini Mag
- Cutdown for single AA or 14500
- Terralux TCS-1 tail clicky, measured at 0.7 ohm resistance
- Nexgen 750mA UX1L sandwich
- 15mm smooth reflector with fins removed (not sure if its the stock one or not)

With the 14500 reading 3.9V and with 900mAh, the current reading at the tail was 800mA, so thats right at an hour of runtime.

First $60 -> $55 -> $50 shipped gets it (continental US), others add $5. Paypal only.
 
Last edited:

Drewfus2101

Enlightened
Joined
Jul 16, 2007
Messages
341
Location
N/A
No major scratches or any blemishes. Just small unnoticeable marks if you look close. All o-rings have been greased.

flashlightpics001bj8.jpg


flashlightpics002wi4.jpg


flashlightpics003td9.jpg


flashlightpics005bo2.jpg


flashlightpics007wz1.jpg


This is the only decent beamshot I got. I didn't change any of the settings in the camera, so its not a good comparison to anything else. But it does show the beam pattern. Its the perfect pattern with no artifacts. Nice tight hot spot with a very usable amount of flood. Pic was taken at 1 meter from wall.
flashlightpics018vp6.jpg
 
Last edited:
Top