Sold/Expired (Closed)WTB:FM MagCharger 37mm Extension Tube.

Edit:FM PMed me and is selling me one at a very reasonable price.Thanks for everyone's input.

I need to upgrade my MagCharger to 6-1/2 d's to overdrive a Phillips 5761.

I can think of at least 1 member who has been hoarding these.LOL

Re: WTB:FM MagCharger 37mm Extension Tube.

Anyone...........

Re: WTB:FM MagCharger 37mm Extension Tube.

you need more than 37mm.
6 sub c fit in 4d, they stick past the thread. magcharger basically a 2.5d.
iirc magcharger tube is the same size as d tube, correct me if i'm wrong.

Jesus Hernandez has extensions, i bought one from him a while ago

Re: WTB:FM MagCharger 37mm Extension Tube.

Here's what I'm looking for......

https://www.candlepowerforums.com/posts/1155968&postcount=1

Re: WTB:FM MagCharger 37mm Extension Tube.

ANDREAS FERRARI said:

Here's what I'm looking for......

https://www.candlepowerforums.com/posts/1155968&postcount=1

Click to expand...

37mm would be enough for 6 1\2d (3d) cells not 6 sub c cells. sub c are longer,

d size extension would also work, same thread, pm Jesus Hernandez.

p.s. and you will have to use different charger, oem charger is for 6v pack, it wont fully charge 7,2v.

Re: WTB:FM MagCharger 37mm Extension Tube.

These are offered on the bay, are the threads the same for a Mag and Magcharger?

Re: WTB:FM MagCharger 37mm Extension Tube.

alpg88 said:

37mm would be enough for 6 1\2d (3d) cells not 6 sub c cells. sub c are longer,

Click to expand...

You are right-I meant that I wanted to add an additional 1/2 D cell.Will correct my original post.

alpg88 said:

p.s. and you will have to use different charger, oem charger is for 6v pack, it wont fully charge 7,2v.

Click to expand...

As far as I know each individual cell will still charge to 1.2v.....6x1.2=7.2v.
The charger this light come with does not shut off when it reaches a certain voltage.It take 16 hours to fully charge and continues to trickle charge after that.

If I can't find one of FM's extension tubes I might ask Jesus Hernandez if he can build one for me.Thanks for the help.:wave:

mrartillery said:

These are offered on the bay, are the threads the same for a Mag and Magcharger?

Click to expand...

Those look interesting.But would be too long unless I go to 7-1/2 D's and 8.4 volts.I would need an entirely different bulb.I should look into that.

BTW-I checked and the threads on the tails of a MC and a D-mag are the same.The threads on the other end are apparently different.

Re: WTB:FM MagCharger 37mm Extension Tube.

ANDREAS FERRARI said:

BTW-I checked and the threads on the tails of a MC and a D-mag are the same.The threads on the other end are apparently different.

Click to expand...

Ok, now Ill know for future reference. :thumbsup: