Cree MTG emitters
- Thread starter DKlaser
- Start date
Help Support Candle Power Flashlight Forum
127.0.0.1
Flashlight Enthusiast
12 emitters, not one...in a single MTG
Up to 1950 lm from all 12 combined
fyi for home lighting these are the best ever tint
Up to 1950 lm from all 12 combined
fyi for home lighting these are the best ever tint
Last edited:
Quick answer is ~ 5 amps which will be good for ~2800L. That is star mounted. If it was copper mounted, it would be well over 3k, since I got over 3,100L in initial startup. Google search "more emitter test results" and you'll see where I tested the MT-G2 and others via bench power supply and an I.S.
Thr3Evo
Enlightened
Any idea how one of these bad boys will do in a big sst-90 reflector like dx or kd sells?
Good question. I don't have one of those reflectors for testing, but I can say that the 80mm MT-G2 reflector that cutter.com specifically sells for this emitter will do ~45-50kcd @3 amps. I would expect the smooth sst-90 reflectors to do better.
The exact bin I tested was MTGBEZ-00-0000-0B00P050H 5000k available from cutter. Hope that helps!
Changchung
Flashlight Enthusiast
Can you post some pics here???
Sent from my phone with camera with flash and internet on it...
127.0.0.1
Flashlight Enthusiast
yes, one chip. one type has an array of 12, the other one has an even bigger array
both of these are Cree MTG series emitters
trout
Enlightened
will all those little bumps show up in an aspheric beam
127.0.0.1
Flashlight Enthusiast
aspheric should show all the surface of the chip
mostly intended for directional interior lighting
mostly intended for directional interior lighting
