Handschmeichler 4.0

Hi,

i would like to share my latest prototype - the handschmeichler 4.0

Some technical details about the hardware:

- 1 x 128 Gbyte USB Storage
- 1 x Atmel 32u4 µC
- 2 x Osram Oslon high Cri
- 1 x Osram Oslon Deep Red
- 1 x Nichia NCSU276A
- 1 x Bosch BME280
- 1 x TCS34725
​

- 1 x ADXL345

- 1 x selfmade 7135 driver
- 1 x Oled 128x32 Display
​

- 6 x tritium vial​

you can messure:

- air temperatur
- air humidity
- air pressure
- altitude
- brighness in Lux
- light color in kelvin
- max lux memory
- angle (spririt bubble)

to turn on the light, there is a classical switch on the side. to change the brighness there is a poti beside the switch. to change the color from white to red or 365nm uv you have to long press the button when first page (flashlite page with battery status, brighness level status and led color information) is displayed.
to change to the next display site you have to short click. each page have some special function with long oder doubleclick.

the software takes more then 40 hours to complete. i´m not a complete noob in that, but also no specialist. the mechanical side takes more then 50 hours to complete. there was many work to fit all parts inside. the display circuit board alone tooks more the 3 hours, cause there was a lot to do to small down to fit inside.


















Short Video demonstration:


Thanks for Looking, Markus

Very cool!

Very innovative!

You've got talent & skill!

That is the best gadget I have seen on CPF, bar none.

If I could afford to ask you for a price, I would. I have one million uses for that thing at work.

You must increase battery size before going to Kickstarter with this. This is the only reason I am not sending you PayPal yesterday.

obi

thank you both.
the goal was to size the light so it will fit inside the small jeans pocket on the right side. so size is 60mm x 40mm x 8mm. it is 1mm higher then the version3, so the battery have 100ma more juice. that´s not much, but for me enough. i could make a longer version then maybe a battery with 500ma will fit.
i will make some pictures fromt he inside, then you will see what i´m talking about.

markus

I like that. Looks totally wild. Is it going to be produced?? I would be interested.

You build some amazing stuff Markus, but this by far has to be my favorite!

Very inpressive!

That is really cool!

You should really try to patent it before your ideas are stolen. Amazing!

I still have yout 1000Kcd Black Bullet.

I should also say

Obijuan Kenobe may not have been able to send his paypal yesterday, but I don't mind sending his paypal today.

Just kidding obi.

Very cool , it amazing to watch . [emoji1303][emoji108][emoji109]

Very original, great concept!

Cool as HELL!

Hi,

thanks for all the kind words.

I made a version 3.9 for a member here:



It have all the cool features from the 4.0, but only three leds and no usb storage. but it have the brand new nichia nvsu233a-d1. the case was also a test case from me, so it have an nice engraving on the back side:


the software is now complete english and temperature in fahrenheit:


You can pm me if you like to get one.

markus

God this thing is cool but given the materials and time it must cost $500+, am I way off base?

Very cool light!
This could be easily a commercial light!
Keep on doing your work

@ThirstyTurtle

yes the version 3.9 starts at 650$

markus

Is it possible to get a titanium case instead of aluminum?

Very cool! I'm with Kuan re titanium. Any beam shots?

Let's make it 3 requests for Ti then.