age_ranger
Newly Enlightened
- Joined
- Jun 24, 2010
- Messages
- 8
I had been running my EagleTac on 123's until my rechargeables arrived. Well, they arrived today and I picked up the Tenergy 2600's with the Tenergy multipurpose charger. Charging was a breeze and this evening I was able to fire up the RaidFire Spear. Run time was about 1 hour 45min before shutoff. I then wanted to check out the EagleTac and after putting in the batteries, it wouldn't turn on. I went through all the checks and nothing.........
After a few seconds I realized the positive end of the battery is not making contact with the spring at the head due to a black plastic ring around the brass plate on the spring at the head. What to do? I just bought 4 of these protected batteries and the charger and would like to use them. Should I modify the light or make an adapter for the positive end of the battery?
After a few seconds I realized the positive end of the battery is not making contact with the spring at the head due to a black plastic ring around the brass plate on the spring at the head. What to do? I just bought 4 of these protected batteries and the charger and would like to use them. Should I modify the light or make an adapter for the positive end of the battery?