• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

McGizmo Aqua series with trits

easilyled

Flashaholic
Joined
Jun 25, 2004
Messages
7,252
Location
Middlesex, UK
I do have some of Mohanjude's 007 tritium buttons and could easily attach one with a dab of superglue to the base of the Aquaram's tail recess, but I would prefer a press-fit tritium disc of nearly the internal diameter of the recess.
 

Str8stroke

Flashlight Enthusiast
Joined
Nov 27, 2013
Messages
5,032
Location
On The Black Pearl
Easy, I have the Norland, not the trits. Looking up sizes. I think I can put two 8mm end to end in the center and work my way out with various colors & sizes?? I am going to look up that button. That was another idea someone had. I also thought about those round spheres. But, seem fragile. lol


EDIT: Found that button. Wow, that is nice! let us know if that works. Can one purchase those buttons now?
 
Last edited:

easilyled

Flashaholic
Joined
Jun 25, 2004
Messages
7,252
Location
Middlesex, UK
Easy, I have the Norland, not the trits. Looking up sizes. I think I can put two 8mm end to end in the center and work my way out with various colors & sizes?? I am going to look up that button. That was another idea someone had. I also thought about those round spheres. But, seem fragile. lol


EDIT: Found that button. Wow, that is nice! let us know if that works. Can one purchase those buttons now?

I don't think Mohanjude is making the 007 buttons anymore. I'm still holding out for a larger diameter disc though. I'll be very curious to see the results of you Norlanding those tritiums though. :)
 

RedLED

Flashlight Enthusiast
Joined
Oct 5, 2006
Messages
3,599
Location
Palm Springs, CA, Beverly Hills, CA, Washington, D
Ha ha, good idea with Norland! Someone buy about 10-15 trits all different colors, drop em in to the tail then just top off with Norland! Bet it would look awesome...

Just a thought here...what if you covered the vials in a layer of silicone, and once that is set cover the top layer with Norland? Just in case you drop the light it does not all crack or fall out
 
Top