2000lumen+ LED reverse lights.. *Output Pics* MMMmm...

[kawgomoo]

this is great! do you have this board behind a plastic lens? i would like a setup like this for the break lights in an offroad car of mine. so i can flip a switch and make the brake/running lights have enough output so they can function as reverse lights in a pinch. not sure how much the red lens will hurt output.

what are your thoughts on making a mr16 style bulb that has cree's with at least 900 lumen output. 12-14 volt. draw is not important as there is a alternator and auto sized battery on board.

 

[VanIsleDSM]

It will be behind a plastic lens when installed.

If you put them behind a red lens you won't get white light any more.. it'll be red, and output will suffer immensely.

 

[Wok]

Got these for a similar project [camp light]
http://cgi.ebay.com/20pc-HP-10mm-40...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
They are 10mm;warm white;40 degrees.

Light is quite yellow.
Vf is not spec
50mA - 2.98V
80mA - 3.08V
100mA - 3.11V
120mA - 4.15V

Averaged over 30 samples.