kmart356
Enlightened
Sold it - Surefire L1 McGizmo Mule
Surefire L1 Lumamax McGizmo Mule - Sold
- Delrin Tailstanding Shroud.
- L1 Lumamax host with standard factory driver
Excellent condition.
- McGizmo Mule head
$156.77 shipped USPS conus Sold to DrafterDan
L1 host
...no mods to this L1 body - 2 mode twisty just like you expect
McGizmo Mule head
- Cree XR-E (Q4) LED on MCPCB in the Aleph Mule Head
Delrin tailstand shroud
Photo credit: kmart356
_____
Item #2: Surefire L1 Lumamax_Malkoff VME M31
...custom lego build by me.
$132.88 - Shipped USPS conus only Slashed to $105.50. Sold to rumack. Thank you
L1 Digital Lumamax host has been "neutered" by removing the factory driver.
- battery shelf remains, battery installs from rear just like other L1's
- L1 tail cap controls the two mode twisty operation for 280 lumens high/approx. 30 on low.
- Long, bezel down clip.
- Polymer spacer (fits where driver used to be) with steel rivet to provide positive contact to M31 drop in.
- body is darker green HA while tail cap is more gray HA
Malkoff VME head (black) with M31 low voltage drop in
- 0.8 to 3.3 volts
- XP-G2
- primary cell only
- thin spacer provides solid contact between drop in and body at the front.
http://i1057.photobucket.com/albums/t400/pasaje8/L1_VME_1_zpsfohbzgj8.jpg
http://i1057.photobucket.com/albums/t400/pasaje8/L1_VME_3_zpslpamowat.jpg
http://i1057.photobucket.com/albums/t400/pasaje8/L1_VME_5_zpsipzwagmb.jpg
Surefire L1 Lumamax McGizmo Mule - Sold
- Delrin Tailstanding Shroud.
- L1 Lumamax host with standard factory driver
Excellent condition.
- McGizmo Mule head
$156.77 shipped USPS conus Sold to DrafterDan
L1 host
...no mods to this L1 body - 2 mode twisty just like you expect
McGizmo Mule head
- Cree XR-E (Q4) LED on MCPCB in the Aleph Mule Head
Delrin tailstand shroud
Photo credit: kmart356
_____
Item #2: Surefire L1 Lumamax_Malkoff VME M31
...custom lego build by me.
$132.88 - Shipped USPS conus only Slashed to $105.50. Sold to rumack. Thank you
L1 Digital Lumamax host has been "neutered" by removing the factory driver.
- battery shelf remains, battery installs from rear just like other L1's
- L1 tail cap controls the two mode twisty operation for 280 lumens high/approx. 30 on low.
- Long, bezel down clip.
- Polymer spacer (fits where driver used to be) with steel rivet to provide positive contact to M31 drop in.
- body is darker green HA while tail cap is more gray HA
Malkoff VME head (black) with M31 low voltage drop in
- 0.8 to 3.3 volts
- XP-G2
- primary cell only
- thin spacer provides solid contact between drop in and body at the front.
http://i1057.photobucket.com/albums/t400/pasaje8/L1_VME_1_zpsfohbzgj8.jpg
http://i1057.photobucket.com/albums/t400/pasaje8/L1_VME_3_zpslpamowat.jpg
http://i1057.photobucket.com/albums/t400/pasaje8/L1_VME_5_zpsipzwagmb.jpg
Last edited: