LED Zeppelin
Flashlight Enthusiast
#1) at left, the 3 X MC-E I built using the MZP7-3 sink, detailed here.
- (3) MC-E M WD in series, each with dies wired in parallel
- (3) cut McR27XR (same as used for the P7 build) EDIT: now with cut McR27S
- Shark Buck 3A/Remora
- Regulated LED currents are 0.4, 1.0, and 2.8A on lo, med, hi
- At 11.1V, light draws .35, .89, and 2.4A on lo, med, hi
- Module can run on 11.1V - 25V or 3-6 li-ion cells
**SOLD**$395 installed in your KT4 head plus shipping. Sale includes module only, no head or host included.
The module installed in a light will look like this:
EDIT: Reflectors have been changed, see post #15.
#2 at right in second picture, an MZOX-4, very similar to the light in this post from the M-Zeppelin thread. This one is built with warm white LEDs.
- (1) 6-die Ostar, 4500K
- (1) Fraen Ostar reflector w/ custom trim ring
- (3) Cree XRE Q3 5A
- (2) McR17XR
- (1) McR19XR
- Blue Shark/Remora
**SOLD**$385 installed in your KT4 head plus shipping. Sale includes module only as in first picture, no head or host included.
This is a picture of the module for sale installed in a host:
Prices include installation if desired. You ship me your head, I send it back within 2 days with the module installed along with the removed parts. Payment is made when I have the head finished, packaged and return shipping calculated.
Last edited: