Sold/Expired M6 Deep Tail Cap 2x26500

[RichS]

IMR-M3T is 3.4A - so not quite an hour, maybe 40 minutes.

FM - this is a really nice product. Thinking about a purchase.

Thanks for correcting my mistake - I was thinking of the IMR-M3.

 

[AW]

#08 M6 Deep Tail Kit $38
#09 M6 Deep Tail Kit $38
International Shipping $10
Total $86

Thanks!
AW

 

[william lafferty]

I'll take 1 x M6 deep tail kit w/ McClickie................52.00
black boot.......................................................... 1.00
orange boot........................................................ 1.00
shipping.............................................................. 6.00

Total..................................................................60.00

Thanks,

bill

 

[EvilLithiumMan]

I am pretty frustrated. I received AW's softstart switch today. I installed in the deep tailcap with fully charged IMR26500 cells and it won't turn on. A few things I have done to analyze the problem:

I removed the deep tailcap. I set my Fluke meter to measure amps and placed the probes from the IMR26500 negative to the M6 body. The MN20 bulb instantly (and brillantly) came on. Clearly there is no issue with the lamp or the cells.

The only other suspect is AW's softstart switch. I removed it from the deep tailcap and installed it in a C2. There it works fine, 3 levels, flashing and I can clearly see it is softstarting.

So all the elements by themselves work fine. But when I put everything together, "this dog don't hunt".

What have I overlooked? Is there anything else to check?

 

[AW]

EvilLithiumMan,

I haven't received my two deep tail caps yet. I suggest to check if the spring of the switch is making contact with the battery -ve. If not, try to pull the spring ( very carefully not to break it off from the pcb ) to extend it just enough to make contact. Or if the switch spring is too stiff, you may try extending the lamp module spring instead.

AW

 

[EvilLithiumMan]

EvilLithiumMan,

I haven't received my two deep tail caps yet. I suggest to check if the spring of the switch is making contact with the battery -ve. If not, try to pull the spring ( very carefully not to break it off from the pcb ) to extend it just enough to make contact. Or if the switch spring is too stiff, you may try extending the lamp module spring instead.

AW

The spring is not the problem. It's length is fine. As a matter of fact, if you hold the tailcap next to your ear while tightning it, you can hear the spring being compressed.

But I have identified the problem. It took a close visual inspection of the deep tailcap, but I can clearly see the issue: the contact area of the deep tailcap is too far away and does not make contact with the M6 body, even when fully seated.

Despite this situation, I now have my M6 working with the IMR26500 cells, and the solution is pretty ironic - I replaced the deep tailcap with the standard tailcap fitted with your M6 softstart switch! It works great. The only issue is that with the standard tailcap fully seated, it is about 3mm away from the lanyard ring, so there is that extra gap for the ring to flop around.

Bottom line - I have a M6 fitted with IMR26500 cells and softstart / 3 level operation. Once again I am a happy modder.

 

[fivemega]

#01 M6 Deep Tail Kit $52 Steve in SoCal paid shipped
#02 M6 Deep Tail Kit $52 Bob96 paid shipped
#03 M6 Deep Tail Kit $52 Visible EM Wave paid shipped
#04 M6 Deep Tail Kit $52 LightJunk paid shipped
#05 M6 Deep Tail Kit $52 jdriller paid shipped
#06 M6 Deep Tail Kit $38 EvilLithiumMan paid shipped
#07 M6 Deep Tail Kit $38 EvilLithiumMan paid shipped
#08 M6 Deep Tail Kit $38 AW paid shipped
#09 M6 Deep Tail Kit $38 AW paid shipped
#10 M6 Deep Tail Kit $52 william lafferty paid shipped
------------------------
[size=+1]If there is anybody who hasen't receive his/her order, please let me know to check shipping status.[/size]

[size=+2]More M6 Deep Tail Caps Available.

Please Check Post #1 For Next Available Number.[/size]

 

[iflyjts]

#11 M6 Deep Tail Kit with extra Orange boot $39
Combined shipping from FM Megalennium-B order.

thanks,

iflyjts:thumbsup:

 

[taylor]

Paypal sent for :

#12 M6 Deep Tail Kit with black boot & installed McClickie switch $52 + $8 (International Shipping)

Total $60 Thanks.

 

[mosley]

Thank you Mr. Fivemega.

1) I'll take #14 w/ McClicky switch -- $52
2) xtra blackboot -- $1
3) xtra GID boot -- $1
4) shipping -- $6

Total.........................................$60.00

Thanks,
mosley

 

[mosley]

#14 now available -- I am purchasing a Megalennium-b instead.
Thank you,
mosley

 

[fivemega]

[size=+2]More M6 Deep Tail Cap Available.

Please check post #1 for next available number.[/size]

 

[monkeyboy]

for

#14 M6 Deep Tail Kit with installed McClicky and shipping to UK

total = $60

thanks

 

[monkeyboy]

Received it today, thanks

The tailcap can also be used to fit 8AA which can drive the WA1268 or WA1164

link

 

[taylor]

Paypal sent for:
#15, #16 & #17 M6 Deep Tail Kit
3 x $52 with installed McClickie switch.
Shipping : $8 + $2 +$2
TOTAL : $168

 

[Siliconti]

SiliconTi, payment sent $44, for #18 M6 Deep Tail Kit, black boot, no switch

 

[fivemega]

[size=+2]More M6 Deep Tail Cap Available.

Please check post #1 for next available number.[/size]

 

[milomilo]

milomilo for

#21 M6 Deep Tail Kit installed McClickie switch with black boot $52
International Shipping $8
Total $60

Thanks!
milomilo

 

[crazy11]

Excessive quote removed

Hi fivemegaI want to buy $52 with installed McClickie switch,I will shipping it to a friend of me who study in USA now~I want to know how much freight will I pay for~ You can write to me with a email ([email protected])~My English is no good,sorry about that~

 

[fivemega]

I want to know how much freight will I pay for that

[size=+1]Shipping $6 any quantity to States[/size]