Sold/Expired New Cree XP-G2 P60 Replacement Modules

[nailbender]

Sorry,
yes: 1.4 A l/m/h driver but with XM-L2 as led

HI

Thanks just wanted to make sure.

Have a good day

Dave

 

[nailbender]

Thanks for the quick answer,
114,99 (5DG41880EB290484W) for the 2 inserts,

2 * 40 XM-L2 insert(s)
+ 10,99 for 3.100 Panasonic unprotected 18650 battery (pair?)
+ 12 * 2, intl shipping (weight of batteries)


... standard level power is ok
... if two times shipping is not needed, please add another 18650 battery

Hi

Your modules shipped today along with 2 batts, you should have received confirmation from our shipper stamps.com

thanks

Dave

 

[OneBigDay]

• (1 each) XP-G2 R5 flux 3D 5000k / OP Reflector / 3 Mode L-M-H / 2.8-6V driver / 1.4 amps @ $35
• (1 each) XP-G2 R5 flux 3D 5000k / OP Reflector / 3 Mode L-M-H / 2.8-6V driver / 1.7 amps @ $35
• (3 each) Shadow 18650 sleeve for 26650 batteries @ $3 each

Total $79.00

Thanks as always for making these modules! :candle:

 

[nailbender]

• (1 each) XP-G2 R5 flux 3D 5000k / OP Reflector / 3 Mode L-M-H / 2.8-6V driver / 1.4 amps @ $35
• (1 each) XP-G2 R5 flux 3D 5000k / OP Reflector / 3 Mode L-M-H / 2.8-6V driver / 1.7 amps @ $35
• (3 each) Shadow 18650 sleeve for 26650 batteries @ $3 each

Total $79.00

Thanks as always for making these modules! :candle:

Hi

Please next time use the PP in my bio or use the store if you can. We have not used that PP addy for years and easier to keep up wiht things if new one is used or the store.

thanks

Dave

 

[OneBigDay]

Sorry about that Dave, I should have double checked but you are a contact in my PP since I have bought quite a few modules. I'll remove that email from my paypal and use the store front next time. Thanks

 

[nailbender]

• (1 each) XP-G2 R5 flux 3D 5000k / OP Reflector / 3 Mode L-M-H / 2.8-6V driver / 1.4 amps @ $35
• (1 each) XP-G2 R5 flux 3D 5000k / OP Reflector / 3 Mode L-M-H / 2.8-6V driver / 1.7 amps @ $35
• (3 each) Shadow 18650 sleeve for 26650 batteries @ $3 each

Total $79.00

Thanks as always for making these modules! :candle:

Hi

Order shipped

thanks

Dave

 

[yellow]

wide beam modules received

Your modules shipped today

and got in here last Friday,
:thumbs up:
wow, extremely quick build and good shipping

 

[nightstalker101]

Re: XP-G2

Removed. Will send question in PM.

 

[leroy82646]

Re: XP-G2

Nail.... Need one dropin for a fivemega cooley:

XP-G2 R2 flux 7B4 tint 3100k warm white --- 3 level, OP, 2.8 to 6 volt....

Thanks a bunch...
leroy

PS--- paypal just done....9/15... 4:25 pm...

 

[nailbender]

Re: XP-G2

Nail.... Need one dropin for a fivemega cooley:

XP-G2 R2 flux 7B4 tint 3100k warm white --- 3 level, OP, 2.8 to 6 volt....

Thanks a bunch...
leroy

PS--- paypal just done....9/15... 4:25 pm...

Hi

Built and shipped

thanks

Dave

 

[OfficerCamp]

Hey Dave. I'll take a:

XP-G2 S2 flux 2B tint 6000k, single mode. 3/4 Amp. Orange Peel reflector. I'm running it off of (1) 18650 Cell or 2 cr123s in an emergency so a 6V driver.

Thanks in advance!
Camp

Edit: can I please change my emitter to XP-G2 R5 flux 3D tint 5000k
Thanks Dave

 

[nailbender]

Hey Dave. I'll take a:

XP-G2 S2 flux 2B tint 6000k, single mode. 3/4 Amp. Orange Peel reflector. I'm running it off of (1) 18650 Cell or 2 cr123s in an emergency so a 6V driver.

Thanks in advance!
Camp

Edit: can I please change my emitter to XP-G2 R5 flux 3D tint 5000k
Thanks Dave

Hi

No problem but it will be tomorrow for shipping as I have to rebuild it since I have no reason to check this thread once the order has been made and ALL orders are made to your specs so there is no switching to another on the shelf. It was built to your order in paypal so I will rebuild later today when I get a chance.

Dave

 

[joco]

hi, Dave,

PP sent for: one XP-G2, R4 flux, 5B4 tint, 4000K, 4 levels - Moonlight/Low/Med/High

Probably going in a Surefire C2.

Thanks, John (cpf- Joco)

P.S. 2.8 to 6 volt, 1.4 amps

 

[nailbender]

hi, Dave,

PP sent for: one XP-G2, R4 flux, 5B4 tint, 4000K, 4 levels - Moonlight/Low/Med/High

Probably going in a Surefire C2.

Thanks, John (cpf- Joco)

P.S. 2.8 to 6 volt, 1.4 amps

HI

4 levels are now starlight / low / med / high.

Also I see no mention of reflector choice here or in PP notes. Smooth or textured?

Thanks

Dave

 

[joco]

Sorry, Dave,

Smooth.

John - cpf : joco

 

[nailbender]

Sorry, Dave,

Smooth.

John - cpf : joco

HI

Got it thanks

Dave

 

[nailbender]

hi, Dave,

PP sent for: one XP-G2, R4 flux, 5B4 tint, 4000K, 4 levels - Moonlight/Low/Med/High

Probably going in a Surefire C2.

Thanks, John (cpf- Joco)

P.S. 2.8 to 6 volt, 1.4 amps

Hi

Module shipped today

Dave

 

[XFlash]

Hi Dave
PP Sent for the following.
Thanks - Xflash

XP-G2 R4 flux 5B4 tint 4000k
2.8-6 volts 1.4 amps
4 levels *moonlight, low, med, high* 1.5 amps only
OP reflector
35.00
Host will be UltraFire
CPF Name: Xflash

 

[nailbender]

Hi Dave
PP Sent for the following.
Thanks - Xflash

XP-G2 R4 flux 5B4 tint 4000k
2.8-6 volts 1.4 amps
4 levels *moonlight, low, med, high* 1.5 amps only
OP reflector
35.00
Host will be UltraFire
CPF Name: Xflash

Hi

As mentioned just a couple of posts ago the drivers are now starlight / low / med / high

Dave

 

[XFlash]

Hi

As mentioned just a couple of posts ago the drivers are now starlight / low / med / high

Dave

OK thanks for the update.
is starlight dimmer than moonlight or the same?
I read somewhere below 1 lumen.
Either way am looking forward to it.
Thanks - Xflash