Sold/Expired Odd Mods Adapters, 3AA-21AA, M6 rechargeable solutions, Dummy cells, Customs!

[hippymill]

do you have a 2 x 18650 adapter that would fit a 3d maglite body? thanks

 

[mdocod]

Hello Eric,

no one has never asked before an adapter for side by side 18650 cells in a mag host? I need an adapter that can be switched for parallel or series for18650 cells....adattable also for 2D mag to 6D...if possible obvious!

Please let me know, thanks.

Hello Flex76italy,

The adapters I build are non-adaptable to alternate configurations. If you have a specific configuration need, contact me via PM with that specific configuration for a quote on a custom unit. I have done a few side-by-side adapters for mags in the past as custom orders. As far as adapting them to work with different length hosts, that's just a matter of having dummy spacers made up to fill the empty space.


----------------------------------------------------

do you have a 2 x 18650 adapter that would fit a 3d maglite body? thanks

Hello hippymill,

Most people would just use a tube spacer to fill the void between the cell diameter and the inside diameter of the mag host and run the cells end-to end. In the case of a 2x18650>3D configuration, you would also probably need a short dummy cell to make up the difference in length, and a minor modification to the tailcap spring in order to make contact with the cell properly. Generally it is more common to do 18XXX cell conversions in C body maglites because they are a better use of space for cells mounted end-to-end.

----------------------------------------------------

Eric

 

[JonnyC]

Paypal sent for 3AA to 1D Series Adapter. Thanks!

 

[vestureofblood]

Hi Eric,

Do you happen to make a 4AA to 1D series adapter? If so what's the cost?

Thanks

 

[las3r]

if so ill buy them

 

[mdocod]

JonnyC,

Order Shipped!

---------------------------

vestureofblood,
las3r,

Sorry, no such adapter available at this time.

Eric

 

[darkknightlight]

I'll take a 6aa>2d adaptor, please. ($35) + shipping ($3.50)
total: $38.50
Thanks!
Paypal will be sent momentarily

 

[NotRegulated]

I'll take one 2x18650 For SureFire M6.

$30 each. $2 domestic shipping.

$32 sent via Paypal.

 

[mdocod]

darkknightlight,
NotRegulated,
NightKids,

Orders Shipped!

Thank You,

Eric

 

[NightKids]

6aa>2d adaptor $35
Int shipping $5

TOTAL : $40

Paypal sent !

 

[DimmGo]

2x18650 adapter $30
International shipping $2.75

TOTAL : $32.75

Paypal sent!

 

[darkknightlight]

Adapter received! Thanks so much for a great product and quick shipment!

 

[ascot]

Hi Eric,

Do you have stock available of the 12AA > 4D ~14.4V adapters?

Just wanted to make sure before I order.

Thanks,

 

[rmeav8er000]

Do you have any 2x18650 adapters for an M6? If so, PM me with your PayPal address and a total. Email address is [email protected]

 

[mdocod]

DimmGo,

Order shipped a couple days ago!

Thank You,

--------------------------------

ascot,

Yes, several in stock ready to ship.

-------------------------------

rmeav8er000,

Yes, several in stock ready to ship.

-------------------------------

Eric

 

[monkeyboy]

for one (2 x 18650) adapter for Surefire M6 and international shipping
total = £32.75
thanks

 

[ascot]

Thanks Eric, $55 PayPal sent for one 12AA > 4D ~14.4V adaptor with international shipping

 

[Rees]

6AA -> 2D Button top adapter $35
US shipping $3.50
total: $38.50

 

[mdocod]

monkeyboy,
ascot,
Rees,

Orders shipped out 11-7-11!

Thank You,
Eric

 

[Denfer]

OddMod Please advise ...
Could the 3aa(x3)=3D OddMod adaptor be constructed/wired with the 3AA (side by side) in parrallel and at the same time be wired in series for each 'D Cell' equivalent? This would limit total voltage to 3x(3x1.5v)=max 4.5v (if lithium aa's are used).

I am trying to adapt the maximum number of energizer lithium AA bats within a 3D Mag, while not exceeding the 9.0v max rating for the Malkoff 3-6D dropin.

The Malkoff Dropin info cautions:
"The current output to the led is 1000ma on 3, 4, 5 or 6 D cells. It can be operated with rechargeable cells as long as the maximum input of 9 volts is not exceeded."

CPF folk feedback appreciated also ...