Sold/Expired P60 modules - warm, neutral, cool white/XPG- XML / SST-50 -90 P60 modules (part 8)

[MIKENC]

Hey Dave,

Love the XML's I got from you, thanks. Sorry if I missed it, but what tints do you have in stock for xre-r2 ?

 

[uberjeff]

Hey Dave,

Paypal sent: 4PA13284CR2639442

- Cree XM-L P60 $40
- T50 flux Bin E4 4500K neutral white
- 3 level Low / Med / High
- 2.8 Amps Driver
- LOP reflector
- Thermal Potting - $5 upcharge

It's for use in my Surefire C2. Currently with 2xCR123, will be changing to 18650 soon.

Thanks,

Jeff

 

[dbleznak]

Does anyone know If Dave does
XM-L U2 drop-ins yet? I would ask him directly but I know he is traveling. Thanks

 

[recDNA]

Will any of your drop ins produce full output using 2 X L91 Lithium Single A primaries in a Dereelight Javelin host? If so any suggestions which would be best?

I asked this a while ago...I apologize if I missed the reply?

 

[easilyled]

Does anyone know If Dave does
XM-L U2 drop-ins yet? I would ask him directly but I know he is traveling. Thanks

I asked this very question about a month ago. Dave replied saying that the only U2s that he was aware of were the quad-die easy-whites.

Well I know that there are single-die XML-U2s available with similar tints to T6s, so I hope that he will be able to order some and start making drop-ins with these too. :thumbsup:

 

[stallion2]

Hello Dave!
I need another P60 from you. Paypal has been sent. Here is what I'm after:

-XM-L
-T50 flux bin E4
-3 mode, low/med/high (2.8A high)
-thermal potting
-smooth reflector

Thanks again,
Wyatt

 

[SwatDude]

Anyone heard from Dave? Is he back? I sent a PM last week with a ton of questions on the SST-90.

 

[jak3All3n]

Hi Dave, I would like to get some drop-ins from you, however, I don't have the rights to either see your profile nor PM. What's your Paypal?

I would like 2 drop-ins:

Cree XM-L regulated for 1x18650 $40
Brightest tint available
3 modes with memory L/M/H (2.8A high)
Potting with tape $5
Smooth reflector

Cree XP-G regulated for 1x18650 $35
Brightest tint available
3 modes with memory L/M/H (1.4A high)
Potting with tape $5
Smooth reflector

International shipping $5

Total: $90 + 4% = $93.60

Are there any options on how modes are selected? I've got a ThruNite drop-in that memorizes the last mode that was on for at least 3 seconds and a Solarforce drop-in that switches mode when the light is turned off then on within 3 seconds. I prefer the Solarforce method.

 

[Rat]

Hi Dave I am after two of the same drop ins just differant voltage Max throw with these please.

1x XR-E (Coolest white you have please 6500K or as high as you can) $30
3.6V - 6V
regulated
Pushed as much as you can
Single mode
Potted w/tape $5
Smooth reflectors (focused for tightest hotspots)
International shipping $5

1x XR-E (Coolest white you have please 6500K or as high as you can) $30
4V-14V
regulated
Pushed as much as you can
Single mode
Potted w/tape $5
Smooth reflectors (focused for tightest hotspots)
International shipping $5

Using with C2 single 18650 & C3 2x 18500

Total $80

 

[Distortion]

Thanks for the reply Dave, paypal sent for the following:

Cree XM-L
T-50 flux bin E4 4500K neutral
3 level HI/MED/LOW
2.8 amp
Smooth reflector
potting/tape
running off 2xCR123A

 

[jak3All3n]

Hi Dave, please see post #668 for my order, I don't yet have privileges to PM or check your profile for PayPal info. Hopefully, this post will enable me to do so.

 

[BingoBongo]

Ill take one.I will take this Dropin in a SF Z2 (1x18650 and 2xCR123) with FM Cooling Bezel.

Cree XM-L $40 2.8-6 volts
T50 flux Bin E4 4500K neutral white
3 level Low / Med / High
Smooth reflector
Potting/ tape $5
High 2,8A regulated (forget it to write it in the PayPal message,hope this is ok)

Priority Mail (International) $15


40+5+15 = $60


PayPal sent

 

[yarney05]

I will take 2 of this combination:

XM-L T6 1C
2.8 amp
3 Mode L/M/H
Smooth Reflector
Potting with Tape
+4% CC payment

Total: $93.60

 

[dbleznak]

Does anyone know if Dave can make a drop-in that will fit in a VME head?

 

[luopo]

Does anyone know if Dave can make a drop-in that will fit in a VME head?

I'd like to know as well

 

[Viper715]

Make that three as I could use another choice for my VMEs.

 

[417PC]

Back for more:

1x XPG Q2 7A3 HCRI.
1 Level 2.8-6v
Thermal Potting
LOP Reflector

1x XPG Q2 7A3 HCRI.
3 Level H/M/L 2.8-6v
Thermal Potting
LOP Reflector

$80 Total.

Thanks Dave!

 

[dbleznak]

Hi Dave, I'm looking for a max throw and direct drive drop-in. I want lux and a tight hotspot. Would that be xpe or xpg? Obviously smooth reflector and two optics would also be needed , correct? If you guys have any suggestions, I would love to hear them. Thanks

Dan

 

[hksp]

any plan for XM-L U2 ?

 

[nailbender]

HI

I am back and hopefully will be about caught up after tomorrow or Sunday, I had a large order I could not fill before leaving and have worked through all but a few of the ones ordered while gone. I will try to answer questions later this weekend but to answer a couple I have seen let me say that I do not have any U2's yet and will not until I use up my T6's as posted a few pages ago. Once my T6's are used up I will inquire about some U2's even though none of the US distributors are stocking them. I have answer this in a few places somewhere a few pages ago. I have not been too concerned becuase of the T6's I have had and the fact they are only U2's so they are only about one flux bin higher.

As for VME heads, I have been told they do not fit with out some work diameter wise but I don't own a Vme head I am just going by what I have been told.

R2 XRE's come in WG tint only


Dave