Sign-up thread for the MillerMods high power Arc AAA Cree XR-E mod

[BeamJunkie]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

P3 Me Too!

 

[Meeshi_ma]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

I'm in for a replacement head for my old Arc whenever you get these going (p3 of course...)

 

[Pumaman]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

put me down for 1 as well

 

[Manzerick]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

one P3 for me




I'll use a ..... as not ta beeeee.... a wannabe LOL

 

[BentHeadTX]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

Eric,
If I send you a empty Arc AA head, how much would it cost to have it modded with your 1.25 watt driver? Since I have a spare AA (not AAA) empty head I might as well use it.

 

[cqbdude]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

What heck is a P3? and why am I putting my name down for one?

 

[Nitroz]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

What heck is a P3? and why am I putting my name down for one?

LoL! You down with OP3.

P3 is the higher flux bin for the Cree LEDs. 73 to 80 Lumens at 350mA.

 

[9volt]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

Put me down for a P3

EDIT: make that a Q3 please.

 

[marcdilnutt]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

Count me in for a P3 in my long put off 1.5W brass AA mod. I will also be after a AAA with the lowest possible low setting and 1.25W high please.
Marc

 

[cy]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

350 milliamps from an ARC AAA form with two stages and CREE XR-E looks to be a winner!

will this support AAA li-ion and NMH?

 

[MillerMods]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

350 milliamps from an ARC AAA form with two stages and CREE XR-E looks to be a winner!

will this support AAA li-ion and NMH?

Li-ion cells are not suitable with my driver but with the drive level you can get with a NIMH cell, there really isn't any advantage anyways. Eneloop cells are the answer to the self-discharge problems usually associated with NIMH cells.

 

[mcmc]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

Eric: pls make mine from my earlier post a P3 as well, when you get to them.

How long are you thinking, from now until actual product in ppl's hands? This is more of an experimental project, no?

 

[nuggett]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

How about one in my peak pacific? can a p3 fit?
If so I am in!

 

[Reaper]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

Finally, maybe my dim AA can really be EDC'ed. Looking forward to a P3.

 

[MillerMods]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

How long are you thinking, from now until actual product in ppl's hands? This is more of an experimental project, no?

Hoping to find out tonight if I can get them to work in my Arc mods. I'll keep you posted.

 

[BentHeadTX]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

Hoping to find out tonight if I can get them to work in my Arc mods. I'll keep you posted.

Cool, I have an Arc AA empty head laying around that begs for a P3.

 

[marcdilnutt]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

I have my fingers crossed Eric, keep us posted! I will order up the parts for my mod from Peak as soon as you can confirm that this will work. Good luck!
marc

 

[mcmc]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

Awesome, Eric! Look forward to seeing the results. Best of luck =)

 

[smokelaw1]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

Hoping to find out tonight if I can get them to work in my Arc mods. I'll keep you posted.

Can't wait to hear! Let us all know! We'll work out what to do with the order depending on the results!

 

[mcmc]

Re: Just ordered some Cree XR-E 7090's for Arc AAA mods

Eric - any thoughts about using 4 of these Cree's in your Quad-lux build?