Closet_Flashaholic
Enlightened
I picked 4 random eneloops from that same vintage and they all test between 1925 and 1955 maH. My gut is telling me that these other batteries are not eneloops.
Some eneloops fluorescing under UV?
- Thread starter Closet_Flashaholic
- Start date
Help Support Candle Power Flashlight Forum
Closet_Flashaholic
Enlightened
I purchased these years ago. I just discovered this fluorescing characteristic a couple of days ago. Since I have many eneloops, I thought that 8 with this oddity required further investigation. Hence where we are today. I am not going to disclose the source of where I purchased them except to say they're a well know distributor here in the USA and to this forum. Since I purchased them so long ago, I am not seeking recourse from them, although I may inform them, but what would I tell them, I "think" these are counterfeit? No, this is just more an informational thread at this time.
Closet_Flashaholic
Enlightened
I don't have any eneloops that are under 1850 maH (using my charge/discharge numbers on a C9000), except for these and that includes ones that I purchased many years ago. I would have to look and see what my earliest date codes are, but they're at least as far back as 2006 era, I think.
I have always treated eneloops with care and never abuse them. Even Gen I numbers are typically above 1900. When I see 1755 maH numbers, that's a problem for me.
Like I said, life goes on I guess. We just get a little smarter along the way. I am not going to lose any sleep over 8 batteries, but I am going to be more leary with new eneloop purchases going forward.
Closet_Flashaholic
Enlightened
I wish I could buy eneloops locally, at any price. There just not anywhere near where I live (closest is probably 100 miles away).
WalkIntoTheLight
Flashlight Enthusiast
Check the date stamps on them. I suspect the florescent ones are 2006, and the others perhaps 2008 or 2009. Your poorer capacity numbers from the florescent ones may simply be due to the fact that they're the oldest.
Again, I see no reason yet to suspect they are fakes. You purchased them years ago, when gen1 were in production, and there was at least two different wrappers during the production runs of gen1 Eneloops, the oldest being the ones with big AA letters.
There is no place around here that has them either, I opted to buy a bunch of duraloops they can be acquired in many stores but you have to know which ones are duraloops.
I have been able to take eneloops testing in the 1700's, and have a very high success rate bringing them back above 1900 by running a few cycles (3 or more), a discharge at 100mAh, and a break-in/forming charge. It's always produced an improvement, and almost always gotten them back to 1900+
mcnair55
Flashlight Enthusiast
Perhaps both of you should try Panasonic Evolta if they are available,personally I prefer them to Eneloop and cost wise roughly the same.
Never seen them here either. Duraloops are the only eneloop substitute around here locally, the alternative is the "brids" or chinese Rayovac Hybrid clones.
n3eg
Newly Enlightened
I just pointed my UV LED light at my entire box of NiMH cells - hybrids, eneloops, duraloops, and whatever - and nothing lit up.
UV leds are cool though.
UV leds are cool though.
Closet_Flashaholic
Enlightened
Thanks for testing. I was really hoping someone else in the community would have found some in their stash. I think it is really strange that I am the only one that has these. I thought that if any others like this existed, somebody in this forum would have found them
. I wonder if it's possible that these were exposed to something that would make them fluoresce like that? It's a mystery.
tandem
Enlightened
I'd like to check my collection of 100's of Eneloop/Duraloops out but am too cheap to buy a UV LED light, and too old (and too hip) to go to clubs with an armful of cells.
The capacity differences aren't definitive enough on their own. Still... it wouldn't surprise me if you stumbled on to something.
Counterfeit cells are a problem but I've not concerned myself with looking for counterfeit NiMH cells when fakes of bad Chinese cells are so much more entertaining (see sig).
The capacity differences aren't definitive enough on their own. Still... it wouldn't surprise me if you stumbled on to something.
Counterfeit cells are a problem but I've not concerned myself with looking for counterfeit NiMH cells when fakes of bad Chinese cells are so much more entertaining (see sig).
I made one, by accident, once.
I had a AA Maglite LED. It went to giving flaky output, cutting out a lot. I thought it was a poor connection, screwed the cap off, and sprayed some brake/electronic parts cleaner on it. It must have stripped something off the surface of the LED, because now all I get from it is a faint blue glow, and it causes UV sensitive substances to fluoresce. Now I use it for finding refrigerant leaks using UV dye.
tandem
Enlightened
UserName - cool! I'm going to look for a cheap LED to butcher. There must be one around here somewhere... 
WalkIntoTheLight
Flashlight Enthusiast
You must have taken off the phosphors from the LED. What you're left with is a blue LED. I doubt you're getting much UV spectrum from it, but it might cause some stuff that is sensitive to near-UV to fluoresce.
The only thing I know is that it makes the dye in a can of R134a UV glow charge light up as bright or brighter than a UV light in my toolbox that was purpose-designed to do that.
Similar threads
