Storacell
Page 1 of 9 12345678 ... LastLast
Results 1 to 30 of 244

Thread: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

  1. #1
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,558

    Default (CLOSED) 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    (C L O S E D)

    (C L O S E D)

    (C L O S E D)

    (C L O S E D)


    NO replacement parts available for warranty or for sale.




    Using alligators for charging


    PLEASE READ CAREFULLY, MAKE YOUR MIND, PAY AND FINALLY POST.

    THERE WILL BE NO CANCELLATION AND REFUND.

    Continue from here
    Hi folks,
    These adapters are genuine FiveMega's quality work.
    12AA to 4D adapters to power up 14.4 volt bulb in 4D stock unbored M*g
    9AA to 3D adapters (10.8 volt) to power up an WA1185 or WA1331 in 3D stock unbored M*g
    6AA to 2D adapters (7.2 volt) to power up an WA1111 or ROP in 2D stock unbored M*g
    3AA to 1D adapters (3.6 volt) to power up to 3.6 volt bulb or LED in shortened 1D unbored M*g
    Also possible to use 3x14500 to 1D Li-Ion adapters to power up to 11.1 volt bulb or multiple LED in shortened 1D unbored M*g
    Please follow Positive and Negative marks printed as P and N
    Also allign red marks on upper and lower plastic when loading.
    All adapters come with female tail jack connector (installed) and I will include male jack too. Batteries NOT included
    Remember, center pin of charging jack is POSITIVE
    It is highly recommended to use this feature for recharging batteries by any smart battery pack charger like this for NiMH or this for lithium ion cells. However it is possible to remove batteries to recharge or replace.
    When installing loaded battery holder into flashlight, make sure charging port is at tail side of M*glite.
    Please do not use two of these adapters in same flashlight for higher voltage.
    I also have followings with purchase of battery holder only:
    WA1185 bi-pin bulb which can be overdriven by 9AAs in 3D M*g and WA1111 which can be overdriven by 6AAs in 2D M*g
    12AA to 4D $42 (NOT AVAILABLE) (DISCONTINUED)
    9AA to 3D $39 (NOT AVAILABLE) (DISCONTINUED)
    6AA to 2D $37 (NOT AVAILABLE) (DISCONTINUED)
    3AA to 1D $36 (NOT AVAILABLE) (DISCONTINUED)
    Camless gold anodized deep reflector $36
    Gold anodized deep reflector with cam $41
    Camless chrome plated deep reflector $48
    Chrome plated deep reflector with cam $53
    Bi-pin Philips 5761 $6 each (to use with white 6AA) (AVAILABLE With purchase of battery holder only)
    Pack of ROP (3854) Hi and Low $10 (to use with 6AA) (AVAILABLE with purchase of battery holder only)
    Pack of Pelican (3853) Hi and Low $10 (to use with 6AA) (AVAILABLE with purchase of battery holder only)
    FM Axial 7.4 volt, 3.3A $10 (to use with 7AA) (AVAILABLE with purchase of battery holder only)
    Boro (Hi-Temp) lens $7.50 each (AVAILABLE with purchase of battery holder only)
    Mineral glass lens $3.00 each (NOT AVAILABLE)
    Dummy AA $8 each (NOT AVAILABLE)
    5/64" Hex wrench $1.00 (AVAILABLE with purchase of battery holder only)
    Please note: I am not manufacturer of any bulb and don't sell them for profit. I offer some bulbs here only for your convenience to get them all in same shipment therefore NO WARRANTY on any bulb. If you are not comfortable with this, please get the bulbs elsewhere.
    $7 shipping to States for up to 2 adapters of any kind, then add $0.75 for each additional one.
    $9 shipping to international destination for each adapters of any kind. (No tracking available)
    No additional shipping for bulbs, sockets and or reflectors if purchased with adapters.
    Please make all your purchase at once to save you some shipping.
    Please note: I am not manufacture of any bulb and don't sell them for profit. I offer them here only for your convenience to get them all in same shipment therefore NO WARRANTY on any bulb.
    For ducumentation purpose, it is necessary to post your CPF handle and detail of your order here and paypal note.
    Without above information, I will never figure out what the payment is for and from whom.
    Paypal to: DO NOT PAY
    Please PM me for other type of payment.
    For ducumentation purpose, it is necessary to post your CPF handle and detail of your order here and paypal note.
    Without above information, I will never figure out what the payment is for and from whom.
    Example: NewBee for:
    3AA to 3D $36
    Two WA1185 $12
    One dummy AA $8
    International shipping $9
    ------------------------
    Please see:
    PR Bi-Pin G4 Sockets here.
    Bi-Focal reflectors here.
    Deep reflectors here.
    3x17670 battery holders for $urefire M6 or tri bored 1.25D M*g here.
    4AA to 1D, 8AA to 2D and 12AA to 3D battery holders here.
    2S/2P 18650 M*gs here.

    ------------------------
    Sorry, no replacement parts available for warranty or for sale.
    ------------------------
    Please find link of my other products here and click on each link you are interested on.
    ------------------------
    (C L O S E D)
    Last edited by fivemega; 05-14-2014 at 11:16 AM.

  2. #2
    Flashaholic*
    Join Date
    Jan 2008
    Location
    In the northernmost Sweden
    Posts
    2,504

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    for:
    3AA to 1D $36
    6AA to 2D $37
    shipping $9

    Regards, Patric

  3. #3

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders


    1 order of 12AA to 4D $42
    1 order of 6AA to 2D $37
    shipping $ 6
    total : $ 85.00

  4. #4

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    for

    9AA to 3D$39
    G4 bi-pin SS socket $17
    Colored deep reflector with cam $45
    (2) Bi-pin WA1185 $12
    Boro lens $6.50
    Shipping $6
    Total: $125.50

  5. #5
    Enlightened
    Join Date
    Oct 2009
    Location
    South Dakota
    Posts
    38

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders


    6AA to 2D adapter - $37.00
    G4 bi-pin brass socket - $14.00
    Boro lens - $6.50
    ROP 3854 hi and low pair - $10.00
    Shipping - $6.00

    Total - $73.50


  6. #6
    Unenlightened I-BEAM's Avatar
    Join Date
    Oct 2009
    Location
    Eugene, Oregon, USA
    Posts
    7

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    6AAX2D battery holder $37
    G4 bi-wire Brass socket $14
    1 ea. WA1111 $9
    Shipping $6
    Total $66

    Paypal sent!

  7. #7
    Enlightened Damage1978's Avatar
    Join Date
    Sep 2005
    Location
    West Yorkshire, UK.
    Posts
    18

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    for

    1* 9AA to 3D $39
    1* G4 bi-pin SS socket $17
    1* Colored deep reflector with cam $45
    3* Bi-pin WA1185 $18
    2* Boro lens $13
    1* International Shipping $9
    Total: $141
    Dan
    I sometimes go to my own little world, but that's okay, they know me there.

  8. #8
    Flashaholic Billy Ram's Avatar
    Join Date
    Oct 2009
    Location
    SC
    Posts
    386

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    for: 9AA to 3D adapter $39
    G4 bi-pin SS socket $17
    2ea. bi-pin WA1185 bulbs $12
    S/H $ 6
    Billy

  9. #9

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    for:
    12AA-4D adapter $42
    shipping to states $6

    Thanks!

  10. #10
    Unenlightened
    Join Date
    Oct 2009
    Posts
    1

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    hallo fivemega,

    here is an absoltly greenhorn, who wants to mod a Mag-Lite 3d. Please tell me, how can i get one of your 12AA-to-3D-adapter. I thinke, I need a seriell adapter. I hope, you don´t laugh too much about my bad english. Best greetings - matthias

  11. #11

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    HI Fivemega,
    i want to order:
    1x 12AA to 4D $42
    1x Boro Lens $6.50

    International Shipping $9

    Total: $57.50


  12. #12
    Enlightened SneakyCyber's Avatar
    Join Date
    Aug 2009
    Location
    Tiffin, Ohio
    Posts
    64

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    Sneakycyber
    1 9AA to 3D= 39.00
    1 G4 Bi-Pin SS socket=17.00
    1 bi-pin WA-1185 6.00
    Shipping to The states 6.00
    Total 68.00

  13. #13
    Flashaholic
    Join Date
    Jan 2007
    Location
    Houston TX
    Posts
    129

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    Quote Originally Posted by adler112 View Post
    hallo fivemega,

    here is an absoltly greenhorn, who wants to mod a Mag-Lite 3d. Please tell me, how can i get one of your 12AA-to-3D-adapter. I thinke, I need a seriell adapter. I hope, you don´t laugh too much about my bad english. Best greetings - matthias

    this thread is for the 9aa-3d holders. to do what you're saying you will need to bore the light out larger to fit 12AAs in it. if your light is already bored out the 12AA adapters are here. http://www.candlepowerforums.com/vb/...d.php?t=198633

  14. #14
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,558

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    Quote Originally Posted by Swedpat View Post
    for:
    3AA to 1D $36
    6AA to 2D $37
    shipping $9

    Regards, Patric
    Quote Originally Posted by bemeo View Post

    1 order of 12AA to 4D $42
    1 order of 6AA to 2D $37
    shipping $ 6
    total : $ 85.00
    Quote Originally Posted by luopo View Post
    for

    9AA to 3D$39
    G4 bi-pin SS socket $17
    Colored deep reflector with cam $45
    (2) Bi-pin WA1185 $12
    Boro lens $6.50
    Shipping $6
    Total: $125.50
    Quote Originally Posted by Point Source View Post

    6AA to 2D adapter - $37.00
    G4 bi-pin brass socket - $14.00
    Boro lens - $6.50
    ROP 3854 hi and low pair - $10.00
    Shipping - $6.00

    Total - $73.50

    Quote Originally Posted by I-BEAM View Post
    6AAX2D battery holder $37
    G4 bi-wire Brass socket $14
    1 ea. WA1111 $9
    Shipping $6
    Total $66

    Paypal sent!
    Quote Originally Posted by Damage1978 View Post
    for

    1* 9AA to 3D $39
    1* G4 bi-pin SS socket $17
    1* Colored deep reflector with cam $45
    3* Bi-pin WA1185 $18
    2* Boro lens $13
    1* International Shipping $9
    Total: $141
    Quote Originally Posted by Billy Ram View Post
    for: 9AA to 3D adapter $39
    G4 bi-pin SS socket $17
    2ea. bi-pin WA1185 bulbs $12
    S/H $ 6
    Billy
    Quote Originally Posted by netprince View Post
    for:
    12AA-4D adapter $42
    shipping to states $6

    Thanks!
    Quote Originally Posted by F_P_R View Post
    HI Fivemega,
    i want to order:
    1x 12AA to 4D $42
    1x Boro Lens $6.50

    International Shipping $9

    Total: $57.50

    Quote Originally Posted by SneakyCyber View Post
    Sneakycyber
    1 9AA to 3D= 39.00
    1 G4 Bi-Pin SS socket=17.00
    1 bi-pin WA-1185 6.00
    Shipping to The states 6.00
    Total 68.00
    ================
    Every order in this thread shipped out and you should receive shortly if you haven't.

    More 3AA, 6AA, 9AA and 12AA holders are available.

    4AA, 8AA, 12AA and 16AA holders are available here.

  15. #15
    Unenlightened
    Join Date
    Oct 2009
    Posts
    1

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders


    6aa - 2d battery adapter - $37
    Shipping $6

  16. #16

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    this is awesome. would love to give my 3D Mag the ROP treatment...!

  17. #17

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    1 x 9AA to 3D battery holder $39
    1 x G4 bi pin socket SS $17
    1 x BLACK Cammed reflector $45
    2 x WA1185 $12
    1 x Borofloat lens $6.50

    shipping $6

    total $125.50


  18. #18
    Unenlightened
    Join Date
    Aug 2007
    Location
    CA, USA
    Posts
    6

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders



    1 x 9AA to 3D, $39
    1 x G4 bi-pin brass socket, $14
    3 x Bi-pin WA1185, $18
    Shipping, $6

    Total: $77

  19. #19
    Enlightened
    Join Date
    Dec 2005
    Location
    Colorado
    Posts
    7

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    for:
    3AA to 1D $36 (AVAILABLE) qty=2
    Shipping to States $6
    total $78
    CPF id: buffaloblauch

    thanks, jim.

  20. #20
    Enlightened
    Join Date
    Aug 2009
    Location
    Nuremberg, Germany
    Posts
    62

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    for:

    6AA to 2D $37
    Bi-Focal cammed reflector $25
    Pack of ROP (3854) Hi and Low $10
    Boro lens $6.50
    Shipping to international $9

    Total: $87,5

  21. #21
    Unenlightened
    Join Date
    Nov 2009
    Location
    Saskatoon, SK
    Posts
    5

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    Hi all...love these forums and am just getting into modding.
    I would like to build a m*g85 and I think I can get all of the parts here: 9aa-3d adapter, WA1185 bulbs, Boro lens, Bi-focal reflector, G4 bi-pin socket.
    My noob question is...can I still use the stock M*g switch or do I need to replace that? (I would have PM'ed fivemega directly, but can't PM yet...I think I'm still on double secret probation.)

  22. #22

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    alpg88
    6aa to 2d $37
    shipping us $6
    total $43
    Last edited by alpg88; 11-18-2009 at 07:44 PM.

  23. #23
    Unenlightened
    Join Date
    Nov 2009
    Location
    Saskatoon, SK
    Posts
    5

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    salamor for:
    9AA to 3D $39
    Three Bi-pin WA1185 $18
    Borofloat Lens $6.50
    G4 Bi-pin Brass Socket $14
    Bi-focal Cammed reflector $25
    Intl Shipping $9
    $111.50

    Thanks muchly.

  24. #24
    Flashaholic* lctorana's Avatar
    Join Date
    Jun 2007
    Location
    Melbourne, Australia
    Posts
    2,113

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    for:

    12AA to 4D $42
    G5.3 Socket $29.50
    Dummy AA $8
    Pack of Pelican (3853) Hi and Low $10
    Boro lens $6.50
    $9 shipping to international destination
    Total $105

  25. #25
    Flashaholic* fivemega's Avatar
    Join Date
    Jan 2003
    Location
    California
    Posts
    3,558

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    Quote Originally Posted by salamor View Post
    I would like to build a m*g85 and I think I can get all of the parts here: 9aa-3d adapter, WA1185 bulbs, Boro lens, Bi-focal reflector, G4 bi-pin socket.
    My noob question is...can I still use the stock M*g switch or do I need to replace that?
    WA1185 will pull about 3.3 Amps powered by 9 NiMH AAs and original M*g "C" or "D" switch can easily take it without need of any replacement or modification.

  26. #26
    Banned
    Join Date
    Sep 2009
    Location
    In A Caravan Hunting Aliens.
    Posts
    71

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    Hiya!

    Uhm this is a question for the history books, but how does the positive terminal make it all the way out of that little "charging" hole and mate with the positive terminal of my maglite?

    I'm sorry I'm just not getting how all of this fits together, it would be really nice if there was an original development thread which shows how everything goes together, but parting with $40 without knowing /exacltly/ how it dismantles is kind of iffy and is the only thing holding me back from buying one, that and funds, hehe.

    Macro shots would be great.

    From here it just looks like its got two negative terminals on both ends and its some weird battery adapter from another world where their physics laws are completely whacked and weird.

    I know how the battery packs wire up, I'm just concerned about the terminals.

    Cheers.
    Last edited by Freax; 11-19-2009 at 02:57 PM.

  27. #27
    Enlightened SneakyCyber's Avatar
    Join Date
    Aug 2009
    Location
    Tiffin, Ohio
    Posts
    64

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    The Charging end is the negative and the other end is the positive. The small copper post you hold on to when assembling mates perfectly to the positive termanal on the mag switch housing. Look into your mag and you will see a small spring up by the switch thats what the positive touches. The neg passes through the spring into the body of the flashlight.
    I don't have a flashlight problem. I have a cash flow problem.

  28. #28
    Banned
    Join Date
    Sep 2009
    Location
    In A Caravan Hunting Aliens.
    Posts
    71

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    Ahh right, I get it now, thanks

  29. #29

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    Sorry, posted in wrong thread. Those holders do look good and I'll be placing an order soon!
    Last edited by m1903; 11-20-2009 at 09:59 AM.

  30. #30

    Default Re: 3AA, 6AA, 9AA & 12AA Fivemega battery holders

    package recived, awsome job thanks

Page 1 of 9 12345678 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •