MAD777
Flashlight Enthusiast
Nice work on the flashlight jorn!
And somebody is going to have very clean teeth! LOL
And somebody is going to have very clean teeth! LOL
You can become a Supporting Member.
Having had a Manker M14 (nichia 219B), used it and gave it away, I bought two Astrolux S41s, one in XP-G3 and another in Nichia 219B.
Soon after using the XP-G3 version I noticed that one of the LEDs was darkening and was lacking output. (I have requested a replacement head which should be here soon). Since I'm stilling the original head I'm now noticing two more LEDs are going south as well.
Ok, so tonight I fire up my trusty Nichia 219 version and notice that one of the four less is dimming and acting strange.
Yes, I'm using 18650 batteries but nothing exotic.
Is this a common problem? Am I just having bad luck? Is this a driver/firmware problem? Is Manker/Astrolux aware of the problem?
Auto
It's the latest "rainbow" version ( I ordered both LED versions). I had a sneaking suspicion the optic was causing the LED (don't ask me how I know...)If this is the newer stainless steel version, this is a known problem with the optics crushing the LED. Go to BLF you'll find a thread with lots of unhappy ppl. Good news is astrolux is exchanging the head.
My rainbow had the same problem. They sent a new head and it fixed it. At least so far, so good...It's the latest "rainbow" version ( I ordered both LED versions). I had a sneaking suspicion the optic was causing the LED (don't ask me how I know...)
I'll check it out.
Auto
It's the latest "rainbow" version ( I ordered both LED versions). I had a sneaking suspicion the optic was causing the LED (don't ask me how I know...)
I'll check it out.
Auto
Update: E14 Cree XPG3 and E14 Nichia 219C are available.
More details please visit: http://www.mankerlight.com/manker-e14-cree-xp-g3-nichia-219b-led/
ThanksFor voltage, skip modes downwards with long presses. After moonlight you get turbo, then some strobe, then voltage.
What does 3 blinks followed by 3 blinks mean? Battery was 3.9 volts on meter.For voltage, skip modes downwards with long presses. After moonlight you get turbo, then some strobe, then voltage.
Is the new Nichia 219C 4000K version using the R9050 SW40 high CRI version of the 219C? Thanks.
Manker? Is the 219c version high CRI(90+) or not?
Yes, it is