Recent content by imageicon

Going Gear
fenix-store
  1. I

    CNC XPE bike light

    KTronik i belive your right if thermal properties are right they could probaly go at 1000 mah ... I build a light with 6 xpe in it and by the looks it have quite smaller surface area than yours... standing still itll get too hot riding at speed it seem to be fine and riding slow it gets quite...
  2. I

    CNC XPE bike light

    what a great little light ... truly a piece of art! andres well i wouldnt run leds rated at a maximum 700 mah at a 1000... but else you are absolutely right you will need a 14.8v lithium pack to run this trough efficiently... 3s is just on the edge i recall the xpe leds have lower forward...
  3. I

    Triple R2 Concept

    very nice drawings..! nice to see some concept idea's out in the open... Dhiris.. your a mad man :) 80 degree floods why on ear would you use that?? i usually do 8 degree optics on my mountainbiking lights and for dual emitter setups they are floody enough... anything beyond 12 or 16 degrees...
  4. I

    Taskled?

    chris if your like me its probaly because the 24h mountainbike season have kicked in and like me need to get rdy for 8hour night rides :P
  5. I

    CNC XPE bike light

    how are the production coming along?
  6. I

    14.8V li-ion battery

    Thank you.. but all-battery only ships to US/Canada :( i live in denmark, but there are huge tax on batteries lead acid and nickel cadmium cells only... but that makes lithium batteries priced after that even thou no taxation so the 37$ is like half price or less... maybe some us guy could...
  7. I

    14.8V li-ion battery

    hey guys you got any idea of where to buy some cheap battery packs i used to buy thoose tenergy 14.8v 22-2400 mah at batteryspace for like 30$ each but since then dollar have increased in value about 15% and further they seem to cost about 42-55$ for similar packs now... nearly double the...
  8. I

    Anyone here riding with polymer li-ion battery packs?

    you guys do know that basicly all "explosions" from liPo happens during charging use balanced charger to keep the cells on same lvl ect. second option for explosion is shorting it but i dont see that happening if you make a decent application for it. atleast i wouldnt be worried using a lipo...
  9. I

    Mini-triple Cree

    im 99% sure it looks like a bFlex driver :)
  10. I

    hipFlex

    that is great news finally a feasible way to run several multi emitter chips...
  11. I

    AirBike SSCP7 Everlight

    yes id definatly want more throw less flood... if you know the cutter mr11 kits.. i have similar setup to thoose medium beam handle bar and spot on helmet... i recall that the medium beam is about half as floody as this light!! i am a competitive 24h mountainbiker and it means alot to me...
  12. I

    AirBike SSCP7 Everlight

    basic answer because im a lightAholic ... :o) i like bikelights... so far i build several lights.. nearly 10 ... so the reason to buy the p7 light was simply to test out the performance and quality of a commercial product... but this light spreads the light WAY to much 2-3 times more than...
  13. I

    AirBike SSCP7 Everlight

    hey guys... i went for a 20km ride in the dusk and 2hours climbing then 20km home again.. I think for the price it is a very good light! its not as bright as my cree's and abit more blueish tint... hope to get a few beamshots one of the next days.. very busy atm sorry :(
  14. I

    AirBike SSCP7 Everlight

    i just recived my AirBike SSCP7 Everlight today... and would like to comment abit on it... it seems well build 2 things how ever are not so clever made out 1 is the UI and second is the mount wich is useless for anything other than a permanent mount... other than that i just want to say my...
  15. I

    Dedicated P7 cheap 670 lumens bike light!!

    10-20 days for delivery the korean said :( damn thats sad.... hope its more 10 than 20
See more

Latest posts

Top